Search found 20 matches

by slaxlax
Wed Jul 16, 2008 2:28 pm
Forum: UBCD V4 Support & Troubleshooting
Topic: Boot to Hard Disk
Replies: 5
Views: 13201

No I don't have any card readers or anything like that.. I tried the way you suggested but still no success.. The first two (hd0 hd1) will get a booting label ( print "Booting...") and then it just hangs there. The rest of them just say that it is not a valid boot disk.
by slaxlax
Wed Jul 16, 2008 1:59 pm
Forum: UBCD V4 Support & Troubleshooting
Topic: Boot to Hard Disk
Replies: 5
Views: 13201

Yea I am able to boot to the hard drive if I start it up to boot to that... what I am looking for is a way to boot the hard drive after the computer has already booted the USB. Or in otherwords if the system tries to boot off of the USB I want the USB just to pass and have the system start booting f...
by slaxlax
Tue Jul 15, 2008 2:51 pm
Forum: UBCD V4 Support & Troubleshooting
Topic: Boot to Hard Disk
Replies: 5
Views: 13201

Boot to Hard Disk

I'm trying to boot to the hard disk using UBCD on a usb stick but every time I try it just says "Booting..." and then never goes anywhere. Any idea why this would be? Also, how do you know the partition labels? Default is hd0 is first hard disk and hd2 is second hard disk but what if I have more par...
by slaxlax
Tue Jul 01, 2008 12:34 pm
Forum: UBCD V4 Tutorials & How-Tos
Topic: nfs in freedos
Replies: 9
Views: 22652

thanks as702,
Now when I run whatnic it tells me that the drivers I need are E1000E and E1000 but when I go to the website to find them the link is dead. Do you know where else I can find these drivers?
by slaxlax
Tue Jul 01, 2008 12:32 pm
Forum: UBCD V4 Requests & Suggestions
Topic: PXE / NFS boot
Replies: 6
Views: 45790

Has anyone found a solution for this? I would like to be able to PXE boot UBCD but have all of the systems to boot from (Freedos, Slax, etc) located on an NFS server. I have tried just changing the main.cfg file so that it would look like this LABEL Slax KERNEL [ip-address]:/[folder-with-slax] APPEN...
by slaxlax
Mon Jun 30, 2008 2:16 pm
Forum: UBCD V4 Tutorials & How-Tos
Topic: nfs in freedos
Replies: 9
Views: 22652

when I try to run whatnic it says that its starting but then fails and says bad command or filename - "pciscan". Do you know where I can find pciscan?
by slaxlax
Mon Jun 30, 2008 11:36 am
Forum: UBCD V4 Tutorials & How-Tos
Topic: nfs in freedos
Replies: 9
Views: 22652

On the link that you gave me it says that msnet.cab should be placed in level3. I can't seem to find the whatnic.cab file on the link. How can I find out what network plug-ins I need? Also inside of lib there is no ndis folder, the only folders that are there are aspi and odi16. Thanks for all the h...
by slaxlax
Mon Jun 30, 2008 10:49 am
Forum: UBCD V4 Tutorials & How-Tos
Topic: nfs in freedos
Replies: 9
Views: 22652

is there another network driver that I could add? I know how to add files to the freedos image I just don't know what I would need to put in there.
by slaxlax
Mon Jun 30, 2008 10:05 am
Forum: UBCD V4 Tutorials & How-Tos
Topic: nfs in freedos
Replies: 9
Views: 22652

nfs in freedos

Does anyone know how to mount an nfs share in freedos or any other version of dos? I want to be able to mount it as a drive.

Thanks
by slaxlax
Thu Jun 26, 2008 8:44 am
Forum: UBCD V4 Tutorials & How-Tos
Topic: See USB drives in FreeDos
Replies: 1
Views: 21656

See USB drives in FreeDos

Does anyone know how to mount a USB drive or the hard drive while running freedos off of a boot cd. I know I can run UBCD off of usb but I want to be able to run it off of a CD but be able to write to the hard drive or USB drive.
Thanks!
by slaxlax
Tue Jun 17, 2008 8:32 am
Forum: UBCD V4 Support & Troubleshooting
Topic: Redirect UBCD on console ( com / RS-232 ) port
Replies: 8
Views: 12395

Never mind. I figured out how to make a hot key with ^. Thanks for all the help again.
by slaxlax
Tue Jun 17, 2008 8:27 am
Forum: UBCD V4 Support & Troubleshooting
Topic: Redirect UBCD on console ( com / RS-232 ) port
Replies: 8
Views: 12395

Thanks Icecube! I finally got it to work by using the method described in the link. I don't know what I was doing wrong the first time. Now that I can access the options through console would you know how I can make the options on the menus accessible by pressing a different number for each option i...
by slaxlax
Mon Jun 16, 2008 8:37 am
Forum: UBCD V4 Support & Troubleshooting
Topic: Redirect UBCD on console ( com / RS-232 ) port
Replies: 8
Views: 12395

I tried putting SERIAL 0 at the top of the default.cfg file as well and this file is included in the rest of the menus but it still doesn't seem to work. I can get console redirection if I boot slax from the ultimate boot cd so I know that there is no problem on the host side but I need to be able t...
by slaxlax
Fri Jun 13, 2008 12:51 pm
Forum: UBCD V4 Support & Troubleshooting
Topic: Redirect UBCD on console ( com / RS-232 ) port
Replies: 8
Views: 12395

Thanks for the link. I tried to set it up by adding the line SERIAL 0 (since I only have one serial port) but I still can't get it to show up. I'll get the bios setup through the console but not the UBCD menu. Any ideas on what I'm doing wrong?
by slaxlax
Fri Jun 13, 2008 12:49 pm
Forum: UBCD V4 Support & Troubleshooting
Topic: auto start
Replies: 2
Views: 6229

Thanks Icecube,
I had to change it in the syslinux.cfg file because I was booting from USB but it fixed the problem!
by slaxlax
Fri Jun 13, 2008 10:35 am
Forum: UBCD V4 Support & Troubleshooting
Topic: Redirect UBCD on console ( com / RS-232 ) port
Replies: 8
Views: 12395

Hey killshoot,
I'm looking to do the same thing. Have you had any success in doing this?
by slaxlax
Fri Jun 13, 2008 10:19 am
Forum: UBCD V4 Support & Troubleshooting
Topic: console
Replies: 0
Views: 5211

console

Does any one know how to enable console support for UBCD? I want to be able to boot the CD and control everything via console.

Thanks!
by slaxlax
Fri Jun 13, 2008 10:18 am
Forum: UBCD V4 Tutorials & How-Tos
Topic: auto start
Replies: 2
Views: 13384

auto start

If I want to start UBCD automatically instead of having to push enter when it first starts, what do I need to do to change this? Or in order to just change the time out so that it starts UBCD instead of the hard drive.

Thanks
by slaxlax
Fri Jun 13, 2008 9:58 am
Forum: UBCD V4 Support & Troubleshooting
Topic: auto start
Replies: 2
Views: 6229

auto start

If I want to start UBCD automatically instead of having to push enter when it first starts, what do I need to do to change this? Or in order to just change the time out so that it starts UBCD instead of the hard drive.

Thanks
by slaxlax
Fri Jun 13, 2008 8:16 am
Forum: UBCD V4 Support & Troubleshooting
Topic: console
Replies: 0
Views: 5048

console

Hi,
I was wondering if there was console support for UBCD and how I would get it onto UBCD. Basically I want to be able to put UBCD into a computer and boot it but then be able to control the menu and all of the options through console. Is this possible?

Thanks in advance!