Search found 10 matches

by timaahhh
Wed Jan 27, 2010 8:27 am
Forum: UBCD V5 Announcements & Discussion
Topic: Heat monitor MPrime
Replies: 0
Views: 7642

Heat monitor MPrime

Is there any thermal sensor (CPU) that can be invoked when running MPrime. That can give me current CPU temp. Can lm-sensors be integrated.
by timaahhh
Tue Jan 26, 2010 12:14 pm
Forum: UBCD V5 Announcements & Discussion
Topic: Offline NT Password & Registry Editor?
Replies: 1
Views: 12353

HDD --> Data Recovery
by timaahhh
Wed Jan 20, 2010 11:58 am
Forum: UBCD V4 Support & Troubleshooting
Topic: Want to scan harddrive
Replies: 1
Views: 6460

If you suspect a harddrive failure doing a surface analysis could push it over the edge. Disk scans are very hard on the disk, if you have a failing disk and do a scan it could completely ruin it. If you don't care about the data, then scan away. However if you need the data, try to save the data fi...
by timaahhh
Tue Jan 19, 2010 8:02 am
Forum: UBCD V5 Announcements & Discussion
Topic: mprime23 warnings
Replies: 1
Views: 6836

mprime23 warnings

Error: Illegal SUMOUT Possible hardware failure, consult readme.txt file, restarting test. Error: Illegal SUMOUT Maximum Number of warnings exceeded. Torture Test ran 7 hours, 25 mins - 0 errors, 100 warnings. This error Error: Illegal SUMOUT Possible hardware failure, consult readme.txt file, resta...
by timaahhh
Wed Nov 25, 2009 7:56 am
Forum: UBCD V5 Announcements & Discussion
Topic: Only Low memory mode functionality
Replies: 0
Views: 9573

Only Low memory mode functionality

Is there a reason with my Athlon Xp machines i can only load parted magic in low memory mode with Athlon Xp 2400+? I've tried with up to 1.5 GB and still won't load normally. My P3 Intel machines work just fine with less memory (usually 1 GB). Boards Asus A7V8X-X and Asus K8V SE Deluxe.

Thanks
by timaahhh
Tue Nov 17, 2009 9:37 am
Forum: UBCD V5 Announcements & Discussion
Topic: Is there a GPU stress Tester in the Ultimate CD?
Replies: 1
Views: 10922

Is there a GPU stress Tester in the Ultimate CD?

Is there a GPU stress Tester in the Ultimate CD? I need something to stress some powerful GPU? Generally I would use 3Dmark but I don't have access to an OS on this computer to install anything. Anything as heavy as 3DMark06? That will really bog down top of the line GPU?
by timaahhh
Fri Nov 13, 2009 7:39 am
Forum: UBCD V5 Announcements & Discussion
Topic: Bad Sector detect/repair
Replies: 2
Views: 27568

THANKS!
by timaahhh
Thu Nov 12, 2009 2:21 pm
Forum: UBCD V5 Announcements & Discussion
Topic: Bad Sector detect/repair
Replies: 2
Views: 27568

Bad Sector detect/repair

I used mhdd to repair some bad sectors an old IBM drive. I'm guessing these sectors are mapped out at a firmware level and re-assigned to some parity or reserved sectors. My question; is there anyway to see how many sectors have been re-mapped or re-assigned on a harddrive once its already done? The...
by timaahhh
Wed Oct 28, 2009 11:14 am
Forum: UBCD V5 Announcements & Discussion
Topic: Fast Disk Wipe
Replies: 2
Views: 16651

Excellent, Thank you very much!
by timaahhh
Wed Oct 28, 2009 9:01 am
Forum: UBCD V5 Announcements & Discussion
Topic: Fast Disk Wipe
Replies: 2
Views: 16651

Fast Disk Wipe

What is the fastest disk wiping utility on the UBCD. It needs to perform a secure wipe, covering most if not all sectors on the drive. It does not need to be DOD standard but the more secure the better. Speed however is the key. Right now I'm running DBAN DOD short test, its been running on 2 drives...