Can't access HDD hooked up to SATA I/O Cards
Posted: Fri Mar 23, 2012 10:07 pm
I have an older system that is currently running FreeNAS(OS boots from a flash drive). The board doesn't have SATA ports on it so I had to get a couple of PCI SATA I/O cards to use with the four Barracuda drives I got. FreeNAS had no problems seeing and using the drives, never had to do any special stuff to get it to work. Yesterday, the SMART utility built into FreeNAS emails me telling me one of my drives is going bad. So I take a look and sure enough, one drive is getting bad sectors, and in the the course of a few hours, they climbed from 12 bad sectors to 19. The drive is still under warranty, but I assumed Seagate would require me to run Seatools first, and UBCD is the only way I could run Seatools. No optical drive in NAS machine, and only a laptop as other machine and don't own a SATA to USB adapter. So I get UBCD onto a bootable flash drive, navigate to the Seatools, run it, and it never finds the drive, no matter which port I plug it into. I ended up trying another tool that did find the drive. I'm wondering though if there is a way to get Seatools to work on a drive that's hooked up to a PCI I/O SATA card? I realize this isn't a Seagate forum, but I doubt Seagate would even help me try to diagnose a problem with their software that's being run in an alternate manner that they specify on their site.