Hello,
Following a SW installation, I have a big issue with my laptop, rejecting any Antivirus, disabling all network connections...
So, I decided to use UBCD5012 to troubleshoot.
I launched PartedMagic and then XFPROT on /dev partition. The issue is that 2 hours later the system is still scanning...
Is that normal ?
Do you recommend an other way to troubleshoot ?
Thanks in advance,
Bpat
XFPROT still scanning...
Moderators: Icecube, StopSpazzing
Don't scan the /dev/ directory, it contains the raw devices (hard disks, keyboard, mice, ...) that are available, not the partitions with filesystems.
It also contains /dev/zero (will give all zero's to programs that want to read from it), so Xfprot will keep reading from this device because it always will get data.
Open the partitions that you want to scan with the file manager and look at the path that you see and scan that directory. You can also scan the /media dir, which should contain all mounted partitions.
It also contains /dev/zero (will give all zero's to programs that want to read from it), so Xfprot will keep reading from this device because it always will get data.
Open the partitions that you want to scan with the file manager and look at the path that you see and scan that directory. You can also scan the /media dir, which should contain all mounted partitions.
Last edited by Icecube on Fri Oct 02, 2009 5:35 am, edited 1 time in total.
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
Use Parted Magic for handling all partitioning task: http://partedmagic.com/