Problems with CD/DVD driver?
Posted: Sat May 14, 2011 10:34 am
Hi!
I've been having trouble with my hdd the last couple of days and got recommended to use UBCD to see if the disk is damaged. So I burnt it to a DVD (version 5.0.3) and it loads up just fine, but when I enter the HDD menu and try enter the ES-Tool I eventually get the following lines:
QCDROM v 3.7, 11-12-2006
Driver name is "CDEXATA1"
EIDE DMA controller I-O address F090h, chip I.D. 80861c00h.
No CD/DVD drive to use; QCDROM not loaded
CDROM: No CD-Rom drivers have been loaded
CDROM: Aborted...
and it then tells me that "EStool.bat is missing, check CD" (not exactly like that but something similiar).
Any ideas on what to do?
I've been having trouble with my hdd the last couple of days and got recommended to use UBCD to see if the disk is damaged. So I burnt it to a DVD (version 5.0.3) and it loads up just fine, but when I enter the HDD menu and try enter the ES-Tool I eventually get the following lines:
QCDROM v 3.7, 11-12-2006
Driver name is "CDEXATA1"
EIDE DMA controller I-O address F090h, chip I.D. 80861c00h.
No CD/DVD drive to use; QCDROM not loaded
CDROM: No CD-Rom drivers have been loaded
CDROM: Aborted...
and it then tells me that "EStool.bat is missing, check CD" (not exactly like that but something similiar).
Any ideas on what to do?