Problems with CD/DVD driver?

Try looking for help here if you are having problems with the latest beta of Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Post Reply
Message
Author
Zuy
Posts: 2
Joined: Sat May 14, 2011 10:29 am

Problems with CD/DVD driver?

#1 Post by Zuy » Sat May 14, 2011 10:34 am

Hi!

I've been having trouble with my hdd the last couple of days and got recommended to use UBCD to see if the disk is damaged. So I burnt it to a DVD (version 5.0.3) and it loads up just fine, but when I enter the HDD menu and try enter the ES-Tool I eventually get the following lines:

QCDROM v 3.7, 11-12-2006
Driver name is "CDEXATA1"
EIDE DMA controller I-O address F090h, chip I.D. 80861c00h.
No CD/DVD drive to use; QCDROM not loaded
CDROM: No CD-Rom drivers have been loaded
CDROM: Aborted...

and it then tells me that "EStool.bat is missing, check CD" (not exactly like that but something similiar).

Any ideas on what to do?

Icecube
Posts: 1278
Joined: Fri Jan 11, 2008 2:52 pm
Contact:

Re: Problems with CD/DVD driver?

#2 Post by Icecube » Sat May 14, 2011 11:06 am

Try UBCD v5.1 alpha3:
viewtopic.php?f=7&t=4230
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/

Zuy
Posts: 2
Joined: Sat May 14, 2011 10:29 am

Re: Problems with CD/DVD driver?

#3 Post by Zuy » Sun May 15, 2011 1:42 am

Icecube wrote:Try UBCD v5.1 alpha3:
viewtopic.php?f=7&t=4230
Thank you, that did the trick :)

Post Reply