Create a bootable USB flash drive using UBCD iso

s69 · **Joined:** Sun May 17, 2009 7:44 am **Posts:** 16

see here http://www.youtube.com/watch?v=wX6BHnefIms

StopSpazzing · **Posted:** Mon May 31, 2010 9:27 pm

Now located in the wiki aswell: http://wiki.ultimatebootcd.com/index.php?title=Tutorials:USB_Installation

thetrivialstuff · **Joined:** Fri Jul 23, 2010 9:28 pm **Posts:** 3

This is much simpler under Linux (or perhaps I've been using Linux long enough that it's warped my idea of simple

) -- just look in ubcd/tools/linux/ubcd2usb and follow the readme.

Basically:
0. partition the USB stick
1. mkfs.vfat /dev/sdX1
2. dd if=mbr.bin of=/dev/sdX
3. syslinux the USB stick (exact parameters for syslinux are in the readme)
4. boot from the USB stick

The fun part is that this procedure will also work on hard drives (which, for really warped reasons involving a difficult Windows install, you might sometimes want).

~Felix.

s69 · **Joined:** Sun May 17, 2009 7:44 am **Posts:** 16

StopSpazzing wrote:

Now located in the wiki aswell: http://wiki.ultimatebootcd.com/index.php?title=Tutorials:USB_Installation

This tutorial does not clearly explain how to extract the files from the ISO file and place them in the ubcd-extract folder - you also need a program like winimage to extract the files or mount the iso as a drive using Slysoft CloneDrive which is not mentioned in the requirements.

Icecube · **Joined:** Fri Jan 11, 2008 2:52 pm **Posts:** 1277

s69 wrote:

This tutorial does not clearly explain how to extract the files from the ISO file and place them in the ubcd-extract folder - you also need a program like winimage to extract the files or mount the iso as a drive using Slysoft CloneDrive which is not mentioned in the requirements.

Why not using the good and free 7-zip program?
http://7-zip.org/

StopSpazzing · **Posted:** Sun Oct 03, 2010 8:29 am

Fixed: http://wiki.ultimatebootcd.com/index.ph ... quirements

Now has links to extracting the contents tutorial.

Thanks for the heads up.

thwaptica · **Joined:** Sat Feb 23, 2013 11:54 am **Posts:** 1

I would suggest using Rufus ( http://rufus.akeo.ie/ ). It should detect your USB drive and you just point it at the ISO. It does format the USB drive though, so back that up before creating the boot disk.

Good Luck

Create a bootable USB flash drive using UBCD iso

Who is online