I have UBCD 4.1.1
When I booted from CD, I got:
... (last from screen)
isolinux: Found something at drive = B3
isolinux: Found something at drive = B2
....
isolinux: Found something at drive = A0
isolinux: Found something at drive = 9F
isolinux: Image checksum error, sorry...
I tried another copy of iso, but the same problem. This CDs runs well on annother PCs, but on this board Tomato (Zida) Sis530 with AMD K6-2 450MHz, I am unable to start it (go to blue menu) - booting failed.
There are no problems with booting other boot CDs (goldmemory, W98 etc.)
Where can be a problem?
booting problem
Moderators: Icecube, StopSpazzing
It is a problem with isolinux. Download the last syslinux from http://syslinux.zytor.com/.
Now you have to rebuild the iso of UBCD.
- Unpack it first with winRAR or 7zip. Go to the isolinux folder and search and replace the file isolinux.bin with the isolinux.bin file from the syslinux archive. You can replace also the other files (like memdisk and chain.c32), but this is not nessesary.
- Rebuild your iso with the script in the tools folder.
- Burn the iso to a cd
I hope for you that the newer isolinux.bin version will solve your problem.
Now you have to rebuild the iso of UBCD.
- Unpack it first with winRAR or 7zip. Go to the isolinux folder and search and replace the file isolinux.bin with the isolinux.bin file from the syslinux archive. You can replace also the other files (like memdisk and chain.c32), but this is not nessesary.
- Rebuild your iso with the script in the tools folder.
- Burn the iso to a cd
I hope for you that the newer isolinux.bin version will solve your problem.