USB boot UBCD411
Posted: Sat Jul 11, 2009 4:03 pm
Im kind of new to UBCD, i downloaded the ISO, used ubcd2usb.bat without problems.
Im using Kingstone Datatraveller II 4gb
Usually when booting from USB there is not a problem much problem booting it, im using a Gigabyte (GA-P35-DS3) motherboard.
So in the boot menu (F12) i chose USB-HDD, it tries to boot the chip but gives the following error:
SYSLINUX 3.36 2007-02-10 CBIOS Copyright (C) 1994-2007 H. Peter Anvin
Could not find kernel image: linux
boot:
I thought i had done something wrong and troubleshot it for a few mins, until i decided to try it on my laptop (DELL Inspiron 8600) and to my surprise it was working smoothly.
If anything comes to mind why the usb flash drive will only boot successfully on my laptop and not on my pc, then please advice.
Thanks.
Im using Kingstone Datatraveller II 4gb
Usually when booting from USB there is not a problem much problem booting it, im using a Gigabyte (GA-P35-DS3) motherboard.
So in the boot menu (F12) i chose USB-HDD, it tries to boot the chip but gives the following error:
SYSLINUX 3.36 2007-02-10 CBIOS Copyright (C) 1994-2007 H. Peter Anvin
Could not find kernel image: linux
boot:
I thought i had done something wrong and troubleshot it for a few mins, until i decided to try it on my laptop (DELL Inspiron 8600) and to my surprise it was working smoothly.
If anything comes to mind why the usb flash drive will only boot successfully on my laptop and not on my pc, then please advice.
Thanks.