Problems with UBCD 3.3

Try looking for help here if you are having problems with the Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Locked
Message
Author
The BlackBull
Posts: 3
Joined: Wed Jul 20, 2005 4:16 pm

Problems with UBCD 3.3

#1 Post by The BlackBull » Wed Jul 20, 2005 4:28 pm

@all
Hi! This is my first post at this forum. I use the ubcd since the version 2.11
I have two problems with UBCD v3.3. :?:
1) The Seagate Seatools doesn't work (the PC hangs)
2) The Ontrack data advisor shows an error message about expired license
Is there a solution for this errors?
Thanks

Victor Chew
Posts: 1363
Joined: Mon Feb 21, 2005 10:59 pm
Contact:

Problems with UBCD 3.3

#2 Post by Victor Chew » Wed Jul 20, 2005 6:38 pm

Seagate Seatools has been known not to run properly under UBCD on
certain machines. Does the version that comes with UBCD V3.2 works for you?

Ontrack data advisor has been removed in UBCD V3.3 (due to the expired
license problem). How did you manage to launch it?!

The BlackBull
Posts: 3
Joined: Wed Jul 20, 2005 4:16 pm

#3 Post by The BlackBull » Mon Jul 25, 2005 11:48 pm

@Victor Chew
Sorry about Data Advisor. You're right. The error appears in v3.2

The BlackBull
Posts: 3
Joined: Wed Jul 20, 2005 4:16 pm

#4 Post by The BlackBull » Mon Jul 25, 2005 11:54 pm

The Seatools error seems to be software error. I ran from floppy and the error was the same ( the computer hangs after start any test ). My test machine is a ECS motherboard, PIV 2,6GHz, 512Mb RAM and 2 x 80Gb Seagate IDE disks.

Locked