Fujitsu HDD diag tool doesn't start

Try looking for help here if you are having problems with the Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Locked
Message
Author
vasya
Posts: 1
Joined: Mon Aug 17, 2009 10:33 pm

Fujitsu HDD diag tool doesn't start

#1 Post by vasya » Mon Aug 17, 2009 10:46 pm

Newbie here. Burned UBCD, booted and selected Fujitsu tool under HDD diagnostics. Went thru a bunch of screens with timeouts and ended up at prompt "Q>". The Fujitsu tool did not start, and Dosapps dir cannot be seen. All I can see is drives A and Q with similar structure but without what I need. Environment variable bcdw_cdrom mentioned in FAQ doesn't seem to exist either. If it's relevant, I am getting a beep I think when a CDROM driver is loaded, and there is a message that no drive is detected (or something like that). What should I do? Thanks

Icecube
Posts: 1278
Joined: Fri Jan 11, 2008 2:52 pm
Contact:

#2 Post by Icecube » Tue Aug 18, 2009 12:53 am

Try UBCD50b12.
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/

Locked