trouble customizing some but not all
Posted: Wed Aug 24, 2005 4:57 am
I have successfully customized a few programs to work with UBCD, but I am having trouble with some too. I am trying to add Powerquest drive image 3.01 and Powerquest Deploy Center Version 5.51 as well as a windows me boot disk. I have successfully added partition magic and another custom application to connect to a server. I think where I am doing something wrong is the command in the custom.scr it currently looks like this:
if ($lastKey == key[f1]); then memdisk /images/pmagic.IMA
if ($lastKey == key[f2]); then memdisk /images/rdm.IMA
if ($lastKey == key[f3]); then isolinux /images/pqdc551.IMA
if ($lastKey == key[f4]); then isolinux /images/pqdi301.IMA
if ($lastKey == key[f5]); then isolinux /images/winmeboot.IMA
if ($lastKey == key[esc]); then script main.scn
Where I have isolinux right now I had memdisk but that didn't work so i just tried isolinux. There doesn't seem to be much information or tutorials on how to customize this file, but everything else seems very well documented. The one thing that is common with the 3 that don't work is they all use a windows me boot disk for compatability reasons. The autoexec.bat file for say pqdc551 looks as follows, but I think it is ok:
@ECHO OFF
SET DIRCMD=/O:N
path=\
IF "%config%"=="NOCD" GOTO QUIT
IF "%config%"=="NOCDUSBDOS" GOTO QUIT
IF "%config%"=="QUICK" GOTO QUIT
REM LH \MSCDEX.EXE /D:mscd001
:QUIT
echo.
IF "%config%"=="CDUSBDOS" GOTO NOPARALLELIDE
IF "%config%"=="NOCDUSBDOS" GOTO NOPARALLELIDE
IF "%config%"=="QUICK" GOTO QUICK
\IDE.EXE
:NOPARALLELIDE
REM ECHO.
REM ECHO Insert ImageCenter Disk 2 (Program)
REM ECHO.
REM ECHO.
REM ECHO *** Press Any Key to Continue ***
REM ECHO.
REM PAUSE >NUL
ECHO DeployCenter 5.51
ECHO Copyright 1994-2002, PowerQuest Corporation
ECHO All Rights Reserved.
ECHO.
ECHO Loading. Please wait...
ECHO.
PQIMGCTR
prompt $v$_Type PQIMGCTR and press ENTER to start ImageCenter.$_$P
GOTO DONE
:QUICK
prompt $v$_$P
:DONE
Any info would be appreciated Thanks
--Mike
if ($lastKey == key[f1]); then memdisk /images/pmagic.IMA
if ($lastKey == key[f2]); then memdisk /images/rdm.IMA
if ($lastKey == key[f3]); then isolinux /images/pqdc551.IMA
if ($lastKey == key[f4]); then isolinux /images/pqdi301.IMA
if ($lastKey == key[f5]); then isolinux /images/winmeboot.IMA
if ($lastKey == key[esc]); then script main.scn
Where I have isolinux right now I had memdisk but that didn't work so i just tried isolinux. There doesn't seem to be much information or tutorials on how to customize this file, but everything else seems very well documented. The one thing that is common with the 3 that don't work is they all use a windows me boot disk for compatability reasons. The autoexec.bat file for say pqdc551 looks as follows, but I think it is ok:
@ECHO OFF
SET DIRCMD=/O:N
path=\
IF "%config%"=="NOCD" GOTO QUIT
IF "%config%"=="NOCDUSBDOS" GOTO QUIT
IF "%config%"=="QUICK" GOTO QUIT
REM LH \MSCDEX.EXE /D:mscd001
:QUIT
echo.
IF "%config%"=="CDUSBDOS" GOTO NOPARALLELIDE
IF "%config%"=="NOCDUSBDOS" GOTO NOPARALLELIDE
IF "%config%"=="QUICK" GOTO QUICK
\IDE.EXE
:NOPARALLELIDE
REM ECHO.
REM ECHO Insert ImageCenter Disk 2 (Program)
REM ECHO.
REM ECHO.
REM ECHO *** Press Any Key to Continue ***
REM ECHO.
REM PAUSE >NUL
ECHO DeployCenter 5.51
ECHO Copyright 1994-2002, PowerQuest Corporation
ECHO All Rights Reserved.
ECHO.
ECHO Loading. Please wait...
ECHO.
PQIMGCTR
prompt $v$_Type PQIMGCTR and press ENTER to start ImageCenter.$_$P
GOTO DONE
:QUICK
prompt $v$_$P
:DONE
Any info would be appreciated Thanks
--Mike