I'd use this combination at work, if I manage to get it to work properly.
I looked at:
viewtopic.php?p=608#608
viewtopic.php?t=179
but since my knowledge of UBCD is limited I didn't succeed.
Puppy doesn't have any folders so I copied everything, except isolinux.cfg to the \isolinux folder, overwriting when prompted.
I also used BBIE to get the boot.bin which I placed at the root.
My bootcat.ini looks like this right now:
Code: Select all
C:\ ; Boot from drive C: ; Skip CD.
\ubcd.bin ; Ultimate Boot CD (DOS Utilities) ; Start UBCD 3.3 Basic.
A:\ ; Boot drive A: ; Boot Floppy drive.
:reboot ; Reboot PC ; Reboot.
\isolinux.bin ; Puppy Linux ; isolinux
Code: Select all
default 1
DISPLAY BOOT.MSG
SAY MENU: 2 No acpi 3 Choose HD (ENTER only or 10sec timeout for normal boot)
prompt 1
label 1
kernel vmlinuz
append root=/dev/ram0 initrd=image.gz PFILE=pup001-none-262144
label 2
kernel vmlinuz
append root=/dev/ram0 initrd=image.gz acpi=off PFILE=pup001-none-262144
label 3
kernel vmlinuz
append root=/dev/ram0 initrd=image.gz acpi=off PFILE=ask
label 5
kernel vmlinuz
append root=/dev/ram0 initrd=image.gz PFILE=cd
timeout 100