How to change Baud Rate to let remote console displays right
Posted: Tue Jun 17, 2008 11:35 am
I am using console redirection using a serial port. The default baud rate is 2400. So my remote console displays correctly only when it's set to 2400. But somehow I need to change the baud rate to 9600.
I added a statement at the line of config.sys
mode com1 baud=9600 parity=n data=8 stop=1
But the baud rate is still 2400 after reboot.
Anyone has an idea?
I added a statement at the line of config.sys
mode com1 baud=9600 parity=n data=8 stop=1
But the baud rate is still 2400 after reboot.
Anyone has an idea?