It is currently Thu Apr 17, 2014 4:15 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: S-ATA driver
PostPosted: Wed Jul 16, 2008 3:28 am 
Offline

Joined: Wed Jul 16, 2008 3:20 am
Posts: 3
Hello,

I have seen, that there is an s-ata driver for optical devices implemented on ubcd. Can anybody explain me? How could I implement it myself to a dos batch???

I found the driver gcdrom.sys. But if I implement it to my batch, it doesn't work. :?:

Could anybody help me???

Kind regards

Mario


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 16, 2008 3:58 am 
Offline

Joined: Tue Jun 17, 2008 3:14 am
Posts: 276
Quote:
device /q GCDROM.SYS /D:MSCD000 /Cn


where n is the device controller.

or use the modboot to launch.


Top
 Profile  
 
 Post subject: It doesn't fit!
PostPosted: Fri Jul 25, 2008 5:45 am 
Offline

Joined: Wed Jul 16, 2008 3:20 am
Posts: 3
Thank you for your answer.
Your answer seems to be correct - but in my case - it is not the solution.
Is there an other possibility to edit the gcdrom driver to my batch?

My sourcecode is:

In my config sys:
DEVICE=XCDROM.SYS /D:CDROM
DEVICE=GCDROM.SYS /D:CDROM
or
your remark:
device /q GCDROM.SYS /D:MSCD000 /Cn

in my Autoexec.bat:
MSCDEX.EXE /D:CDROM /L:X

Could you help me???


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 25, 2008 6:53 am 
Offline

Joined: Tue Jun 17, 2008 3:14 am
Posts: 276
ah, ok. if you're installing the driver from config.sys then try this:

Code:
device[high]=GCDROM.SYS /D:MSCD000 /Cn


where n=1..3

i believe your autoexec should then contain:

Code:
MSCDEX.EXE /D:CDROM /L:n


again, where n=1..3

assuming your sata device is valid, it should work.

(-:


Top
 Profile  
 
 Post subject: Good idea - but not the solution
PostPosted: Thu Jul 31, 2008 6:01 am 
Offline

Joined: Wed Jul 16, 2008 3:20 am
Posts: 3
Hello,


if have practiced your solution.

I implemented your sourcecode but only get the message:

"A:\>MSCDEX.EXE /D:CDROM /L:n "

(it doesn't matter if I change the n to 1...3)

"Device driver not found: 'CDROM'
No valid CDROM device driver selected"

What did I do wrong???
Do you have any idea?


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 31, 2008 6:31 am 
Offline

Joined: Tue Jun 17, 2008 3:14 am
Posts: 276
config.sys

Code:
DEVICE=GCDROM.SYS /D:MSCD000 /C0   
DEVICE=GCDROM.SYS /D:MSCD001 /C1
DEVICE=GCDROM.SYS /D:MSCD002 /C2


autoexec.bat
Code:
MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002



what error message(s) do you get?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group