Ultimate Boot CD
http://www.ultimatebootcd.com/forums/

S-ATA driver
http://www.ultimatebootcd.com/forums/viewtopic.php?f=7&t=1442
Page 1 of 1

Author:  dragon1981 [ Wed Jul 16, 2008 3:28 am ]
Post subject:  S-ATA driver

Hello,

I have seen, that there is an s-ata driver for optical devices implemented on ubcd. Can anybody explain me? How could I implement it myself to a dos batch???

I found the driver gcdrom.sys. But if I implement it to my batch, it doesn't work. :?:

Could anybody help me???

Kind regards

Mario

Author:  as702 [ Wed Jul 16, 2008 3:58 am ]
Post subject: 

Quote:
device /q GCDROM.SYS /D:MSCD000 /Cn


where n is the device controller.

or use the modboot to launch.

Author:  dragon1981 [ Fri Jul 25, 2008 5:45 am ]
Post subject:  It doesn't fit!

Thank you for your answer.
Your answer seems to be correct - but in my case - it is not the solution.
Is there an other possibility to edit the gcdrom driver to my batch?

My sourcecode is:

In my config sys:
DEVICE=XCDROM.SYS /D:CDROM
DEVICE=GCDROM.SYS /D:CDROM
or
your remark:
device /q GCDROM.SYS /D:MSCD000 /Cn

in my Autoexec.bat:
MSCDEX.EXE /D:CDROM /L:X

Could you help me???

Author:  as702 [ Fri Jul 25, 2008 6:53 am ]
Post subject: 

ah, ok. if you're installing the driver from config.sys then try this:

Code:
device[high]=GCDROM.SYS /D:MSCD000 /Cn


where n=1..3

i believe your autoexec should then contain:

Code:
MSCDEX.EXE /D:CDROM /L:n


again, where n=1..3

assuming your sata device is valid, it should work.

(-:

Author:  dragon1981 [ Thu Jul 31, 2008 6:01 am ]
Post subject:  Good idea - but not the solution

Hello,


if have practiced your solution.

I implemented your sourcecode but only get the message:

"A:\>MSCDEX.EXE /D:CDROM /L:n "

(it doesn't matter if I change the n to 1...3)

"Device driver not found: 'CDROM'
No valid CDROM device driver selected"

What did I do wrong???
Do you have any idea?

Author:  as702 [ Thu Jul 31, 2008 6:31 am ]
Post subject: 

config.sys

Code:
DEVICE=GCDROM.SYS /D:MSCD000 /C0   
DEVICE=GCDROM.SYS /D:MSCD001 /C1
DEVICE=GCDROM.SYS /D:MSCD002 /C2


autoexec.bat
Code:
MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002



what error message(s) do you get?

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/