Ultimate Boot CD
http://www.ultimatebootcd.com/forums/

UBCD V5.0b8 is available for download
http://www.ultimatebootcd.com/forums/viewtopic.php?f=7&t=1726
Page 1 of 1

Author:  Victor Chew [ Tue Dec 30, 2008 1:49 pm ]
Post subject:  UBCD V5.0b8 is available for download

UBCD V5.0b8 is now available as a torrent download.

Detailed changes:

- Change launch parameters for AIDA16.
- Updated Memtest86+ to V2.11.
- UPdated DFT to V4.15.
- Updated IBM Feature Tool to V2.12.
- Updated Avira AntiVir Rescue System to V3.5.5-20081221195634.
- Updated Parted Magic to V3.4.

Author:  The Piney [ Tue Dec 30, 2008 2:13 pm ]
Post subject: 

Doesn't seem to be starting.. Showing 0(1) Seeding and 0(2) Peers.. Will keep on for a while to see if it starts..

Author:  The Piney [ Tue Dec 30, 2008 2:41 pm ]
Post subject: 

Just started downloading....

Author:  JonaLinux [ Tue Dec 30, 2008 5:17 pm ]
Post subject:  Download ubcd50b8 from the server

For those wanting to download ubcd50b8 faster you can download from http://linuxfreedom.com

You'll find the link at the bottom of the page in red.

Author:  Icecube [ Fri Jan 02, 2009 2:25 am ]
Post subject: 

The beta link on the homepage, links still to UBCD5.0b6.

Author:  Victor Chew [ Fri Jan 02, 2009 10:16 am ]
Post subject: 

@IceCube: Fixed the beta link. Thanks!

Author:  The Piney [ Fri Jan 02, 2009 5:48 pm ]
Post subject: 

Download.com has the new beta now too, had it listed yesterday or day before...

I downloaded via the torrent, but a good option for some..

Author:  hex [ Thu Jan 08, 2009 7:26 pm ]
Post subject: 

Victor Chew wrote:
@IceCube: Fixed the beta link. Thanks!

Still links to b6 for me.

But my reason for signing up is that the linux kernel that boots to run Mersenne Prime test and CPUStress fails to boot successfully on my desktop computer. It does not panic, but it hangs and occasionally gives an error beginning with USB 1-1: <message>.

I tested the image I downloaded in a virtual machine on my laptop as well as from the disc I burned (just in case the image was corrupt or the disc I burned was bad), but it turned out just fine. I assume this is a hardware problem specific to my desktop. UBCD 4.10 works fine. I'd love to be able to run a multi-threaded instance of CPUstress and/or mPrime.

My specifications are as follows:

DFI LanParty DK P35-T2RS
Intel Core 2 Duo E6600 (overclocked but stable)
4GB Corsair Dominator 8500C5D

The rest should be irrelevant (hard disk, GPU, DVD drive), but if you need to know, please alert me.

Author:  Icecube [ Fri Jan 09, 2009 12:01 am ]
Post subject: 

@ hex
Can you see the "CPUstresss v2" title or does it hang earlier?
Can you write down the exact error messages that you get (Press TAB at the menu and edit the filename of the initrd to a non-existing name so you see the kernel output)?

If you have any USB devices atached, detach them and try to boot Mersenne Prime test and CPUStress again and see if that solves the problem.
Reply at the CPUstress image topic:http://www.ultimatebootcd.com/forums/viewtopic.php?t=1476

@ Victor
You only updated the link on the download page, not the one on the home page.

Author:  Victor Chew [ Mon Jan 12, 2009 9:56 pm ]
Post subject: 

Quote:
You only updated the link on the download page, not the one on the home page.


Fix that as well. Shouldn't happen again as I have updated my beta "release" worksheet. :D

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/