Unreadable master file table want to repair to retreive data

Talk about anything related to the UBCD, PC troubleshooting etc.

Moderators: Icecube, StopSpazzing

Post Reply
Message
Author
clstech
Posts: 1
Joined: Wed Feb 18, 2009 6:22 am

Unreadable master file table want to repair to retreive data

#1 Post by clstech » Wed Feb 18, 2009 6:49 am

I have a drive that showed a Windows error of "Unreadable master file table". I used UBCD to run Seatools on the Maxtor drive and the short and long test both failed.

Any suggestions on how to fix/repair this drive so I can get the data off would be very appreciated.

I apologize in advance if I posted this to the wrong area.

Icecube
Posts: 1278
Joined: Fri Jan 11, 2008 2:52 pm
Contact:

#2 Post by Icecube » Wed Feb 18, 2009 8:52 am

Run the following from the recovery console:

Code: Select all

chkdsk /f
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/

Victor Chew
Posts: 1359
Joined: Mon Feb 21, 2005 10:59 pm
Contact:

#3 Post by Victor Chew » Wed Feb 18, 2009 6:09 pm

If both the long and short tests fail, it sounds like there is some hardware error with the HDD.

Normally, I would send it in for replacement if it is still under warranty.

The data recovery is gonna be quite tricky....

Post Reply