Ultimate Boot CD
http://www.ultimatebootcd.com/forums/

Motherboard tools
http://www.ultimatebootcd.com/forums/viewtopic.php?f=9&t=2297
Page 1 of 1

Author:  davidjameskovach [ Wed Mar 10, 2010 11:17 am ]
Post subject:  Motherboard tools

I am a bench tech. I have UBCD 5.0. there are many great tools. I did not see any tools to test the Motherboard itself. I do not assume because it identifies the MB, make and model that the MB itself is good. I also would like to know about using the CPU tools. testing overheating etc. The one i like is the burn tool. How long should I let it run to verify the CPU is good? do you recommend a different tool. Thank you for your time and attention to this post. :D

Author:  StopSpazzing [ Wed Mar 10, 2010 5:45 pm ]
Post subject:  Re: Motherboard tools

davidjameskovach wrote:
I am a bench tech. I have UBCD 5.0. there are many great tools. I did not see any tools to test the Motherboard itself. I do not assume because it identifies the MB, make and model that the MB itself is good. I also would like to know about using the CPU tools. testing overheating etc. The one i like is the burn tool. How long should I let it run to verify the CPU is good? do you recommend a different tool. Thank you for your time and attention to this post. :D


If you are overclocking, I would suggest overnight (~8 hours)... which doesn't seem to be your case, so what I would do is run it for around 1-2 hours. If it hasnt failed by then, it should be fine.

The included cpu stress test tools should be sufice...Prime95 is my fave...but everyone has their own preferences.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/