It is currently Tue Jun 27, 2017 4:24 pm

View unanswered posts | View active topics


Board index » Ultimate Boot CD V4.x (Deprecated) » UBCD V4 Requests & Suggestions

All times are UTC - 8 hours




Forum locked This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 12 posts ] 
  Print view Previous topic | Next topic 
Author Message
xeros
PostPosted: Mon Nov 07, 2005 3:12 am 
Offline

Joined: Tue Oct 25, 2005 4:00 am
Posts: 5
Location: Poland
Victor,
when can we expect the new version of UltimateBootCD?
It's a lot of time since the last version was released.
Most of the software needs to be updated to the new versions.

(Too bad, that new Insert Linux haven't been released since few months, but the last version is newer than this in UBCD.)

Any release date?
Top
 Profile  
Reply with quote  
PsiMoon314
 Post subject:
PostPosted: Fri Dec 23, 2005 7:04 am 
Offline

Joined: Mon Apr 11, 2005 1:41 pm
Posts: 19
Hi Victor,

I appreciate the work that you have done on UBCD and I also know that we are now comming up to Christmas and you many have other things to deal with :-)

Do you have any indication as to when we might expect to see v 3.4 ?

Kind Regards

Simon
Top
 Profile  
Reply with quote  
Victor Chew
 Post subject:
PostPosted: Fri Dec 23, 2005 3:15 pm 
Offline

Joined: Mon Feb 21, 2005 10:59 pm
Posts: 1356
Actually, at my end, I am ready to go. However, Erwin is waiting for a patch to FreeDOS. Once that patch is released, V3.4 will be released. I will check back with him after Christmas.
Top
 Profile  
Reply with quote  
Bitumen
PostPosted: Mon Jan 09, 2006 5:28 pm 
Offline

Joined: Tue Sep 13, 2005 2:52 pm
Posts: 5
Victor Chew wrote:
Actually, at my end, I am ready to go. However, Erwin is waiting for a patch to FreeDOS. Once that patch is released, V3.4 will be released. I will check back with him after Christmas.


Hello, where can I check the current version numbers of the programs, that will be included on V3.4? I was unable to find reference (maybe I wasn't looking thoroughly enough).

I just want to make sure, that these programs upgrade:
Partition Saving 3.0 -> 3.01
mhdd32 4.2 -> 4.6
testdisk 5.7 -> 6.2
(though i did not test the latter).

I would also be happy to find some img'd programs, which are DOS programs at the same time, to be included in the DOSAPPS dir. Notably, Ranish Partition Manager (which has a DOS version) and mhdd32 are two examples which I use frequently, and find it convenient to launch them from there when I'm already running DOS.
Top
 Profile  
Reply with quote  
Victor Chew
 Post subject:
PostPosted: Tue Jan 10, 2006 1:34 pm 
Offline

Joined: Mon Feb 21, 2005 10:59 pm
Posts: 1356
Here's what I have so far for UBCD 3.4:

Code:
- Need maintainer for Mersenne Prime Test.

- Need maintainer for Freesco.

- Need maintainer for BasicLinux to V3.32.

- Disable RockRidge extension during mkisofs. Thanks to Eric for the suggestion.
  http://www.ultimatebootcd.com/forums/viewtopic.php?t=196

- Updated DFT to V4.05. Thanks to SebastienG for the update.

- Updated HUTIL to V2.00. Thanks to SebastienG for the update.

- Updated DBAN to V1.0.6. Thanks to SebastienG for the update.

- Updated IBM Feature Tool to V1.99.

- Removed Madboot due to the use of commerical components. Thanks to Eric Auer for the information.

- Added ExcelStor's ESTest V3.70. Thanks to Steffen Bergner for the suggestion.
  http://www.mce.de/d/frame/index_d.html?/d/service/download/download.html

- Added ExcelStor's SATA Tool V1.10. Thanks to Steffen Bergner for the suggestion.
  http://www.mce.de/d/frame/index_d.html?/d/service/download/download.html

- Updated Necromancer's DOS Navigator to V2.15 Build 4000.  Thanks to SebastienG for the update.

- Updated Memtest86+ to V1.65. Thanks to SebastienG for the update.

- Updated g4u to V2.1. Thanks to SebastienG for the update.

- Updated SeaTools Desktop to V3.02.03en. Thanks to SebastienG for the update.

- Updated MHDD32 to V4.6. Thanks to SebastienG for the update.
  New website: http://hddguru.com/en/

- Updated memdisk to V3.11. Thanks to Erwin Veermans for the update.

- Fixed some bugs in STARTUP.BAT for F-Prot. Thanks to Erwin Veermans for the update.

- Updated FDUBCD, FD32RDP, FSDMSRRC, FDNWD288 to V3.31.
  Thanks to Erwin Veermans for the update.

- Updated Arachne to V1.87. Thanks to Erwin Veermans for the update.

- Removed AntiVir Personal Edition because the free version is crippled (cannot scan
  subdirectories) and therefore quite useless.

- Updated Darik's Boot and Nuke to V1.0.6.

- Added expert mode for booting images. Thanks to Erwin Veermans for providing the idea
  in his dynamic scripts.

- Updated TestDisk to V6.2. Thanks to Christophe Grenier for the update.

- Updated Partition Saving to V3.01. Thanks to SebastienG for the update.

- Updated CMOSPWD to V4.7. Thanks to Christophe Grenier for the update.

- Added x86test V0.10a. Thanks to pointy for the suggestion.
  http://www.vortex.prodigynet.co.uk/x86test/

- Added StressCPU 24-Oct-05. Thanks to Adrian Stanciu for the suggestion.
  This utility seems to make Athlon CPUs hotter than CPU Burn-in.
  http://www.gromacs.org/contributions/index.php

- Updated XXCOPY to V2.92.6. Thanks to SebastienG for the update.

- Updated SPFDISK to 2000-03r. Thanks to SebastienG for the update.

- Updated PCISniffer to V1.4. Thanks to SebastienG for the update.

- Updated Gujin to V1.2.

- Updated D-Browse to V1.24. Thanks for SebastienG for the update.

- Updated Eraser for DOS to V5.7. Thanks for SebastienG for the update.

- Replaced floppy version of Windows Memory Diagnostic with CD version,
  which is smaller by almost 1MB. Thanks to Paul for the suggestion.

- Added mkubcd.bat and mkubcd.sh to root directory for creating customize
  UBCD ISO. Thanks to mark847 for the suggestion.
  Note: Add to customization instructions. Remove build.bat and build.sh.

- Updated Fujitsu Diagnostic Tool to V6.30. Thanks to SebastienG for the update.

- Updated ASTRA to V5.11. Thanks to SebastienG for the update.

- Added link to download MS-DOS boot disk from Erwin.

- Added NTFS4DOS Freeware Version. Thanks for chris122380 for the suggestion.
  http://www.datapol-technologies.com/dpe/recovery/ntfs/index.html

- Removed ctramtest because it does not run properly under the latest version
  of fdubcd.img.

- Replaced GRUB with Super Grub Disk V0.9296:
  http://adrian15.raulete.net/grub/tiki-index.php

- Thanks to Scott D. Wares for updating the documentation.
Top
 Profile  
Reply with quote  
NwDsk
PostPosted: Wed Jan 11, 2006 1:34 am 
Offline

Joined: Thu Feb 24, 2005 1:32 am
Posts: 27
Bitumen wrote:
I would also be happy to find some img'd programs, which are DOS programs at the same time, to be included in the DOSAPPS dir. Notably, Ranish Partition Manager (which has a DOS version) and mhdd32 are two examples which I use frequently, and find it convenient to launch them from there when I'm already running DOS.


Partman.exe (Ranish Partition Manager) is included already on the central FreeDOS boot-image on upcoming V3.4 release. In fact it may already be there on V3.3. Did you try run "help" on the DOS-prompt to see what is available on the image itself (light [Scroll-Lock] and press [Up-Arrow] to browse back your DOS console if it scrolls of the screen)?

Erwin
Top
 Profile  
Reply with quote  
xeros
 Post subject:
PostPosted: Thu Jan 19, 2006 1:43 am 
Offline

Joined: Tue Oct 25, 2005 4:00 am
Posts: 5
Location: Poland
Victor,
could you tell us how is the progress on UBCD 3.4?
Did you get already this 'FreeDOS patch'?
What does this patch?

Could you at least release the UBCD 3.4 Beta/Release Candidate for us to test?
Top
 Profile  
Reply with quote  
Victor Chew
 Post subject:
PostPosted: Fri Jan 20, 2006 6:20 am 
Offline

Joined: Mon Feb 21, 2005 10:59 pm
Posts: 1356
Erwin has released the updated FreeDOS for UBCD. The bottleneck is totally on my side now. Due to a couple of almost comical mishaps, I have been unable to get my broadband connected, so I am still (barely) surviving on dialup. Try uploading 100MB of data through a miserable 56K modem!

Anyhow, with any luck, I should be able to get broadband connected next week or the week after, so UBCD 3.4 should be out by then. Appreciate your patience.
Top
 Profile  
Reply with quote  
wakish
 Post subject:
PostPosted: Sun Jan 22, 2006 3:59 pm 
Offline

Joined: Sun Jan 22, 2006 3:50 pm
Posts: 2
HI everyone! I just signed up!
Thanks to a nice person on another forum, i was made aware of this gifted "all-in-one" software. I congratulate and thank the author of this software for his excellent benovelent work! It's really nice to have such a nice human being doing such nice work!

I was about to download the version 3.3. But as i visit here, i saw a new version is on the way.
Should i download the version 3.3 anyway or should i wait for the new version?

Regards!
Top
 Profile  
Reply with quote  
Administrator
 Post subject:
PostPosted: Mon Jan 23, 2006 5:05 pm 
Offline
Site Admin

Joined: Mon Feb 21, 2005 8:30 pm
Posts: 12
It depends. If you have a lot of bandwidth to spare, I don't see why you shouldn't play around with V3.3 first. Otherwise, please wait for one to two weeks and I promise V3.4 will be released.
Top
 Profile  
Reply with quote  
Bitumen
PostPosted: Tue Jan 24, 2006 7:02 pm 
Offline

Joined: Tue Sep 13, 2005 2:52 pm
Posts: 5
NwDsk wrote:
Partman.exe (Ranish Partition Manager) is included already on the central FreeDOS boot-image on upcoming V3.4 release. In fact it may already be there on V3.3. Did you try run "help" on the DOS-prompt to see what is available on the image itself?


Actually, not. Thanks for the suggestion! :)
Top
 Profile  
Reply with quote  
dang.artman
 Post subject: update issues
PostPosted: Sat Feb 04, 2006 1:18 pm 
Offline

Joined: Sat Feb 04, 2006 1:04 pm
Posts: 1
I am in anticipation of the new ubcd. Until then I am trying to update the disc myself and am running into problems trying to get it to work. I use this every day for work. So far I have created my own *.igz file for memtest 1.65 and cannot get it to boot. I am using the build.bat file, and made the file using rawread, but when I tried to boot it the first time using VmWare it said file not
found, dropped me to the cd shell command line. I noticed my file name was not being recognized properly by typing ls. So i shortened the filename to eight characters. Now it loads the image, but it starts loading and the trys to boot off the floppy drive. I took a snapshot if that will help. I can e-mail it to anyone who may be able to help.[/img]
Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 12 posts ] 

Board index » Ultimate Boot CD V4.x (Deprecated) » UBCD V4 Requests & Suggestions

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB® Forum Software © phpBB Group