It is currently Wed Jul 30, 2014 1:07 am

All times are UTC - 8 hours




Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: pm2ubcd script discussion
PostPosted: Sun Jun 23, 2013 6:20 pm 
Offline

Joined: Mon Feb 21, 2005 10:59 pm
Posts: 1274
Just tested pm2ubcd beta3 to integrate PMagic 06_15.

No problems encountered.


Top
 Profile  
 
 Post subject: Re: pm2ubcd script discussion
PostPosted: Mon Jun 24, 2013 5:54 am 
Offline

Joined: Sat May 08, 2010 5:26 am
Posts: 752
The new pmagic_2013_06_24 testing version has changed its Syslinux menu in several ways. It also updates the Syslinux version, which means that the "old, manual" update method (by copying "all" from pmagic's ISO image into the "./pmagic/" folder in UBCD) might not work correctly in some cases; so the pm2ubcd script is now more useful than before.

I'll be working on an updated pm2ubcd script to handle these recent changes more gracefully. The good news is that the script should avoid problems with the updated version of Syslinux in PMagic in any case.

To be clear, there are several reasons to keep using Syslinux 4.xx in UBCD and not to update to a newer Syslinux version; not yet.

As soon as I can, I'll be posting here an updated version of pm2ubcd. New pm2ubcd2013JUN25 attached to next post, #43.


Last edited by ady on Mon Jun 24, 2013 1:22 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: pm2ubcd script discussion
PostPosted: Mon Jun 24, 2013 1:06 pm 
Offline

Joined: Sat May 08, 2010 5:26 am
Posts: 752
New release, pm2ubcd2013JUN25, compatible with UBCD 5.2.x, and with pmagic_2013_06_23 (testing) and newer.

The same instructions as with previous releases are still valid.

As a remainder, please keep in mind that this script only takes what PartedMagic's developers do. It will not correct any potential issue of the original PMagic. This is specially relevant for the testing versions of PMagic.
Code:
FILE : pm2ubcd2013JUN25.tar.gz
SIZE : 7'383 bytes
MD5  : 78e7c471beb56fb20476d8f795f85052
SHA1 : 8c24f4509766341c2cc5906e727eab27ea365f73

As usual, feedback is very appreciated.

TIA,
Ady
[EDIT_UPDATE]
ATTENTION!!!
:( :oops: :oops: :oops: :oops: :oops: :oops:
There is a small issue with this version of the script. With pmagic_2013_06_23 and newer, the following lines in "
./pmagic/boot/syslinux/syslinux.cfg
" remain:

Code:
INITRD /boot/syslinux/hdt.gz

INITRD /boot/sgd/sgd.gz

INITRD /boot/sgd/sgd2.gz

INITRD /boot/mhdd/mhdd.gz
instead of being edited (by the script) so to point to the correct path, "
/pmagic/boot/...
".

This happens only with those recent changes in PMagic, already commented in the previous post.

I'll take care of these lines in the next release of pm2ubcd. I am leaving for now this release, just for those brave enough :).
[/EDIT_UPDATE]


pm2ubcd2013JUN25_2 attached.

Code:
FILE : pm2ubcd2013JUN25_2.tar.gz
SIZE : 7'436 bytes
MD5  : 1d336476729945e528edb175b8532e51
SHA1 : 0adbf84afa1a4ab1034de9c55560493b39580704


UPDATE: New version released. See next post.


Last edited by ady on Sun Jul 28, 2013 10:52 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: pm2ubcd script discussion
PostPosted: Sun Jul 28, 2013 10:50 pm 
Offline

Joined: Sat May 08, 2010 5:26 am
Posts: 752
For years, PMagic's syslinux.cfg was pretty much unchanged. During the last few months, PMagic's syslinux.cfg has been changed with additions, deletions, re-additions, re-wording,... These changes (and others that are off-topic here) have left some (minor?) inconsistencies in PMagic's boot configuration.

This new version of pm2ubcd tries to cope with some of these changes, so to keep support for newer and for older PMagic versions.

For most (but not all) users, I would suggest manually deleting the content of "
ubcd_extracted/pmagic/boot/syslinux/
" before executing pm2ubcd. The resulting directory should be cleaner (with less unneeded remnants from previous versions of PMagic).

For users with customized "
ubcd_extracted/pmagic/boot/syslinux/
" (meaning, other than an updated standard PMagic), the aforementioned suggestion should be ignored. Such users are always going to need some additional step(s), as pm2ubcd targets standard UBCD.

To be clear, if the previous content of "
ubcd_extracted/pmagic/boot/syslinux/
" is not deleted, nothing terrible would happen; there would be some unneeded left-over files, and the new syslinux.cfg will just ignore those remnants.

I want to remind users, once again, that pm2ubcd only merges PMagic into UBCD; it does not "correct" any inadequate content of PMagic's syslinux.cfg.

As always, feedback is appreciated.

Regards,
Ady.

Code:
File: pm2ubcd2013JUL29.tar.gz
Size: 7'477 bytes
MD5 : 7ed20ecac57b0d7b96b563fc0a9efcd5
SHA1: 52a19137c9612af638eb7d23eff73af0f1f80a24


Attachments:
pm2ubcd2013JUL29.tar.gz [7.3 KiB]
Downloaded 126 times
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group