Try looking for help here if you are having problems with the Ultimate Boot CD.
Moderators: Icecube, StopSpazzing
-
Hokuszpok
- Posts: 16
- Joined: Fri Jan 13, 2006 6:59 am
- Location: Hungary
#1
Post
by Hokuszpok » Sun Mar 16, 2008 11:45 am
Hi!
I made a custom group to UBCD, (LAN / NIC setup and diagnosis).
My floppy images works as well, but the Broadcom's diagnostic apps are to big, they are released as bootable CD images, 8-12 MB...
Trying to load with memdisk, but my PC hangs up when booting the ISO.
Does anybody has resolved this problem?
/Maybe this is specific to my PC?/
-
Scott Cooper
- Posts: 136
- Joined: Mon Apr 18, 2005 9:07 pm
#2
Post
by Scott Cooper » Tue Mar 25, 2008 2:52 pm
Not sure if there is a way to boot ISO files using UBCD4, but if you can extract the diags, try booting them as a "dosapps" item. See the method I used for the Dell Diagnostics.
-
Hokuszpok
- Posts: 16
- Joined: Fri Jan 13, 2006 6:59 am
- Location: Hungary
#3
Post
by Hokuszpok » Wed Mar 26, 2008 12:44 pm
Thanks Scott,
I am thinking about this, I need to made a custom boot system, beacasue NIC diag apps requires specific environment (oftem without any EMM manager for example)
-
The Piney
- Posts: 370
- Joined: Mon Apr 30, 2007 11:06 am
- Location: FL
#4
Post
by The Piney » Wed Mar 26, 2008 1:04 pm
When your booting a Win98 boot disk you can select to do an interactive start up and select not to load that line for the Autoexec.bat and/or Config.sys.
I believe the boot disks included with the project also allow you to select this.