Adding ISO images to UBCD 4.02

Try looking for help here if you are having problems with the Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Locked
Message
Author
Hokuszpok
Posts: 16
Joined: Fri Jan 13, 2006 6:59 am
Location: Hungary

Adding ISO images to UBCD 4.02

#1 Post by Hokuszpok » Sun Mar 16, 2008 11:45 am

Hi!

I made a custom group to UBCD, (LAN / NIC setup and diagnosis).
My floppy images works as well, but the Broadcom's diagnostic apps are to big, they are released as bootable CD images, 8-12 MB...

Trying to load with memdisk, but my PC hangs up when booting the ISO.

Does anybody has resolved this problem?
/Maybe this is specific to my PC?/

Scott Cooper
Posts: 136
Joined: Mon Apr 18, 2005 9:07 pm

#2 Post by Scott Cooper » Tue Mar 25, 2008 2:52 pm

Not sure if there is a way to boot ISO files using UBCD4, but if you can extract the diags, try booting them as a "dosapps" item. See the method I used for the Dell Diagnostics.

Hokuszpok
Posts: 16
Joined: Fri Jan 13, 2006 6:59 am
Location: Hungary

#3 Post by Hokuszpok » Wed Mar 26, 2008 12:44 pm

Thanks Scott,

I am thinking about this, I need to made a custom boot system, beacasue NIC diag apps requires specific environment (oftem without any EMM manager for example)

The Piney
Posts: 370
Joined: Mon Apr 30, 2007 11:06 am
Location: FL

#4 Post by The Piney » Wed Mar 26, 2008 1:04 pm

When your booting a Win98 boot disk you can select to do an interactive start up and select not to load that line for the Autoexec.bat and/or Config.sys.

I believe the boot disks included with the project also allow you to select this.

Locked