It is currently Sat Nov 22, 2014 7:27 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Parted Magic 3.1 is out
PostPosted: Wed Sep 17, 2008 2:34 am 
Offline

Joined: Fri Jan 11, 2008 2:52 pm
Posts: 1278
Some updates in Parted Magic 3.1 RC1 compared with Parted Magic 3.0.
If you set the keymap command to set your keyboard layout (Press TAB at the bootmenu), it should work now.
http://partedmagic.com/phpBB3/viewtopic.php?f=7&t=213
If it doesn't work look at the link above and test which keyboard layout works for you:
e.g.: for the me this is:
Code:
setxkbmap be

Post the information here for your keyboard layout so I can pass it to the Parted Magic forum or post it there yourself.
Currently only 2 keyboard layouts are supported (be and se).

From some USB devices, Parted Magic 3.0 couldn't boot because there was a bug in the kernel. This should be solved now.
http://partedmagic.com/phpBB3/viewtopic.php?f=7&t=196

HFS+ (filesystem for Mac's) support is added.

NTFS CP1251 cyrillic support is added.
http://partedmagic.com/phpBB3/viewtopic.php?f=7&t=189

Maybe the following thing can be interesting for users with a low amount of RAM (less than 350MiB) to run Parted Magic. I don't have downloaded it yet, but I suspect that there won't be 7z archives that have to be decompressed to RAM so that you need 160MB (parted magic default files) + 53MB (antivirus stuff) = 213MB less RAM to run Parted Magic than the other versions (not downloaded yet, so I can be wrong).
Patrick Verner of Parted Magic wrote:
I've worked pretty hard on this and I hope it works, but at this point I'm sure it has problems.

For USB drives:

1) Extract http://partedmagic.com/beef_drapes/pmagic-hdd.tar.bz2 directly to an ext2 partition on a USB flash drive. It should have the file structure like any other linux distro.

2) cd to the root of this new partition and execute:

cat boot/extlinux/mbr.bin > /dev/sdX
boot/extlinux/extlinux --install boot/extlinux

For any normal hard disk (must be a linux file system, EXT2, EXT3, reiser, etc...):

1) Extract http://partedmagic.com/beef_drapes/pmagic-hdd.tar.bz2 directly to a partition. It should have the file structure like any other linux distro.

2) Set-up GRUB or LiLo using the correct "kernel" and "append" syntax found in boot/extlinux/extlinux.conf

This is for testing. Please don't use this for production purposes, yet.

The small initrd is needed to "find" the partition with the installed Parted Magic. Device numbers change from system to system and this eliminates the need to keep changing the device number in the extlinux.conf. So, in theory it should boot from a USB flash without the device numbers confusing the boot loader or computer device configuration.

This does in fact run like any other distro that boots from a hard disk install. Everything you do is saved and everything you break will be there the next boot.


Parted Magic 3.1 RC1 can be downloaded from:
http://partedmagic.com/rc1/.

The last development version of Parted Magic can be downloaded from:
http://partedmagic.com/beef_drapes/.


Last edited by Icecube on Sun Oct 19, 2008 3:23 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 07, 2008 5:42 pm 
Offline

Joined: Fri Jan 11, 2008 2:52 pm
Posts: 1278
I have convinced Patrick Verner (Parted Magic) to include an isolinux option (I did have to write it myself :D) which makes it possible to use the same entries for booting from a cd or from usb so that we need only one entry for Parted Magic in main.cfg.

See: http://partedmagic.com/phpBB3/viewtopic.php?f=8&t=236

You have to replace livecd with liveall in the isolinux.cfg file of Parted Magic:
Quote:
LABEL normal
MENU LABEL ^1. Default settings (Runs from RAM / Ejects CD)
TEXT HELP
* version: 3.1, (C) 2008, Patrick Verner
* http://www.partedmagic.com
* Disclaimer: Author excluded from any liability.
ENDTEXT
KERNEL /pmagic/bzImage
APPEND noapic initrd=/pmagic/initrd root=/dev/ram0 init=/linuxrc keymap=us liveall vga=791 sleep=0 quiet tmpfs_size=350M ramdisk_size=25000


You can now save the networksettings for different computers.
See: http://partedmagic.com/phpBB3/viewtopic.php?f=4&t=220&st=0&sk=t&sd=a&start=20


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 19, 2008 3:51 pm 
Offline

Joined: Fri Jan 11, 2008 2:52 pm
Posts: 1278
Parted Magic 3.1 is out now.

Download it from: http://downloads.partedmagic.net.


Top
 Profile  
 
 Post subject: Re: Parted Magic 3.1 is out
PostPosted: Tue Sep 13, 2011 11:44 pm 
Offline

Joined: Tue Sep 13, 2011 11:42 pm
Posts: 1
Hi all,
i used partedmagic 3.0 (the grub4dos version) with this menu entry and it always worked fine:
title Parted Magic Linux 3.x (Runs from RAM)
find --set-root /pmagic-grub4dos.iso
map /pmagic-grub4dos.iso (hd32)
map --hook
root (hd32)
kernel (hd32)/pmagic/bzImage noapic root=/dev/ram0 init=/linuxrc keymap=us livecd vga=791 sleep=0 ramdisk_size=25000 noeject iso_location=/pmagic-grub4dos.iso
initrd (hd32)/pmagic/initrd
Now when i try the same iwth partedmagic 3.1 it always stops at a shell telling me xorg command not found
any ideas?


Top
 Profile  
 
 Post subject: Re: Parted Magic 3.1 is out
PostPosted: Fri Sep 16, 2011 2:54 pm 
Offline

Joined: Mon Apr 30, 2007 11:06 am
Posts: 298
Location: FL
Are you trying to add PM 3.1 to UBCD 5.1.1? If so, why? The newest Parted Magic (6.6) is included already.

Please provide more information in your posts so more accurate information/suggestions can be provided back to you.


Top
 Profile  
 
 Post subject: Re: Parted Magic 3.1 is out
PostPosted: Sat Sep 17, 2011 1:50 am 
Offline

Joined: Sat May 08, 2010 5:26 am
Posts: 775
@Adgarharrison,

In addition to what The Piney posted, it would be best to open a new topic in the adequate section of the forum, instead of bumping a topic 3-years old.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Protected by Anti-Spam ACP Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group