Freeze During ASPI Manager Load
Moderators: Icecube, StopSpazzing
Freeze During ASPI Manager Load
In the past I have had no trouble getting UBCD to work with my external USB HDs and Ghost version 2003.793.
I recently got a Lenovo W700 and want to image the drive.
When I use UBCD v5.0b12 (I have also tried UBCD v4.11) the ASPI manager ALWAYS hangs (it hangs when it says "...Initializing host controller...")
HELP! (IE, Thanks for any help!)
I recently got a Lenovo W700 and want to image the drive.
When I use UBCD v5.0b12 (I have also tried UBCD v4.11) the ASPI manager ALWAYS hangs (it hangs when it says "...Initializing host controller...")
HELP! (IE, Thanks for any help!)
USB 1.1 Works...
On a side note, I can get USB 1.1 drivers to load without the freeze, so I can make a backup to an external USB with Ghost - it is just real slow...
You can try Plop bootmanager. It can give you USB2.0 speed.
http://www.plop.at/en/bootmanager.htm
Download Plop.
Extract it to get the boot manager binary program plpbt.bin.
You have to rename the file plpbt.bin to plpbt (remove .bin).
Put the file in /ubcd/boot/plop/.
Add this to: /ubcd/menus/syslinux/main.cfg
Run this entry before you run a program with uses the freedos image. You don't need to load additional USB drivers after that.
http://www.plop.at/en/bootmanager.htm
Download Plop.
Extract it to get the boot manager binary program plpbt.bin.
You have to rename the file plpbt.bin to plpbt (remove .bin).
Put the file in /ubcd/boot/plop/.
Add this to: /ubcd/menus/syslinux/main.cfg
Code: Select all
LABEL -
KERNEL /ubcd/boot/plop/plpbt
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
I tried that - after UBCD v5 loads to the main menu I select plop - it starts to load but then quickly the whole screen turns ti alight gray background with flashing orange division characters.
Does Plop work with x64 processors? Did I install Plop wrong? Any Ideas?
Also, is it cool to make the code you described above with a menu label?
LABEL -
MENU LABEL Plop
KERNEL /ubcd/boot/plop/plpbt
Let me know what you think I am doing wrong...
Does Plop work with x64 processors? Did I install Plop wrong? Any Ideas?
Also, is it cool to make the code you described above with a menu label?
LABEL -
MENU LABEL Plop
KERNEL /ubcd/boot/plop/plpbt
Let me know what you think I am doing wrong...
-
- Posts: 49
- Joined: Mon Jun 01, 2009 8:30 am
-
- Posts: 49
- Joined: Mon Jun 01, 2009 8:30 am
Do you get Invalid Opcode messages?
viewtopic.php?t=1845
Does the same entry boot in the grub4dos menu?
viewtopic.php?t=1845
Does the same entry boot in the grub4dos menu?
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
Use Parted Magic for handling all partitioning task: http://partedmagic.com/