INT 13 08: Failure, assuming this is the only drive.

Try looking for help here if you are having problems with the latest beta of Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Post Reply
Message
Author
inethacker
Posts: 2
Joined: Wed Jun 10, 2009 5:34 am

INT 13 08: Failure, assuming this is the only drive.

#1 Post by inethacker » Wed Jun 10, 2009 5:50 am

Hi from Germany,

I'm trying to load SHAT2 but while loading there is the message:

"INT 13 08: Failure, assuming this is the only drive"

and the system froze.

Here is an screenshoot:

Image


Note, that UBCD v5 is running on an Acer Aspire 7520 with 2 SATA-HDD and one IDE HDD (connected by an USB Adapter).

I tried to check the IDE HDD.

What does this messege mean, and how to "bypass" it?

Best regards from Germany!

Update:
The UBCD-CD works fine on another PC.
Some Other Tools like MHDD give the same Error-Message.
So its not the CD or the program, but the failure have to search in my Laptop or the USB-Controller or Adapter, but where and how?

What is your mind?

Icecube
Posts: 1278
Joined: Fri Jan 11, 2008 2:52 pm
Contact:

#2 Post by Icecube » Thu Jul 30, 2009 1:31 pm

Try adding 'raw' to the APPEND line.

See my third post at: viewtopic.php?t=1845

Let me know if it helps and which program do need it.

Does the FreeDos image work without 'raw'?
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/

Post Reply