How do you add a ISO to UBCD (v5)? (Ophcrack?)

Try looking for help here if you are having problems with the latest beta of Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Post Reply
Message
Author
Josso
Posts: 4
Joined: Sun Sep 27, 2009 12:15 am
Location: Denmark

How do you add a ISO to UBCD (v5)? (Ophcrack?)

#1 Post by Josso » Wed Oct 21, 2009 11:09 am

Hey!

How do you add another iso to UBCDv5?
I'm especially looking for a guide for adding OPHCrack.

I'm on a Mac and know how to use the Terminal – I just haven't tried to edit a bootable cd.
I have mkisofs so I can create the ISO again. :)

Icecube
Posts: 1278
Joined: Fri Jan 11, 2008 2:52 pm
Contact:

#2 Post by Icecube » Wed Oct 21, 2009 11:34 am

You can look at this topic:
http://www.ultimatebootcd.com/forums/viewtopic.php?t=1570
It was for UBCD411, so some instructions can be different (like the location of custum.cfg), but I guess you can figure out what you have to change.

Look in /ubcd/tools/win32/ubcd2iso/ubcd2iso.cmd or /ubcd/tools/linux/ubcd2iso.sh for the right parameters for mkisofs to rebuild the iso.
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/

Josso
Posts: 4
Joined: Sun Sep 27, 2009 12:15 am
Location: Denmark

#3 Post by Josso » Thu Oct 22, 2009 8:36 am

Okay...

After some trying and errors I nearly got it working.

I haven't updated Syslinux nor Isolinux but everything else is (nearly) working.

Image

But no matter what I click it ends up with this:

Image

Icecube
Posts: 1278
Joined: Fri Jan 11, 2008 2:52 pm
Contact:

#4 Post by Icecube » Thu Oct 22, 2009 9:39 am

You didn't assign enough memory to your VM.
If you can't assign more RAM to your VM, try the low RAM option.
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/

Josso
Posts: 4
Joined: Sun Sep 27, 2009 12:15 am
Location: Denmark

#5 Post by Josso » Thu Oct 22, 2009 10:19 am

:lol:

128mb wasn't enough I guess. :p

Here are the changes I did (on UBCDv5b12):
~/UBCD is the content of the iso.
~/ophcrack is either the Vista or the XP-version of Ophcrack, extracted form iso.
Move ~/ophcrack (the folder) into ~/UBCD (so the ophcrack-boot-folder is at ~/UBCD/ophcrack/boot)
Change every occurence of /boot with /ophcrack/boot in ~/UBCD/ophcrack/ophcrack.cfg

Now you only need to add a "shortcut":
Add the following in the bottom of f.ex. ~/UBCD/ubcd/custom/custom.cfg

Code: Select all

LABEL ophcrack
MENU LABEL Ophcrack
TEXT HELP
 Start OPHCrack with tables for Vista (or/and XP)
ENDTEXT
CONFIG /ophcrack/ophcrack.cfg


The last step, is to build the iso.
For this you need the executable mkisofs.
I couldn't compile it myself but I did find a pre-compiled in the app Visualhub (a video-converter for Mac – no longer supported).
Open Terminal (or CommandPrompt, on Windows) and navigate to ~/UBCD/ubcd/tools/
Now you have to execute the ubcd2iso.
Windows:
win32/ubcd2iso/ubcd2iso.cmd
*nix:
./linux/ubcd2iso/ubcd2iso.sh

kcarney
Posts: 52
Joined: Tue Nov 24, 2009 9:22 am

#6 Post by kcarney » Mon Nov 30, 2009 1:51 pm

There is a slight typo in your custom.cfg entry

Code: Select all

Code:
LABEL ophcrack
MENU LABEL Ophcrack
TEXT HELP
 Start OPHCrack with tables for Vista (or/and XP)
ENDTEXT
CONFIG /ophcrack/ophcrack.cfg


Should be:

Code: Select all

Code:
LABEL ophcrack
MENU LABEL Ophcrack
TEXT HELP
 Start OPHCrack with tables for Vista (or/and XP)
ENDTEXT
CONFIG /ophcrack/BOOT/ophcrack.cfg


Aside from that everything works :D

Josso
Posts: 4
Joined: Sun Sep 27, 2009 12:15 am
Location: Denmark

#7 Post by Josso » Mon Nov 30, 2009 11:22 pm

Thanks for the correction.

datoker
Posts: 5
Joined: Wed Dec 23, 2009 9:09 pm

#8 Post by datoker » Wed Dec 23, 2009 9:28 pm

Any chance you can post that iso? I would love that I just have no idea how to add that.. Understand if you can, thanks in advanced..

buckshotwhoami
Posts: 3
Joined: Fri Feb 26, 2010 8:26 pm

Working on adding Ophcrack to UBCD 50 RC1

#9 Post by buckshotwhoami » Sat Feb 27, 2010 5:43 am

I am trying this same thing. I have read in this forum about customizing my UBCD: http://www.ultimatebootcd.com/customize.html

I still cannot get my ophcrack to boot or to be seen in the Initial menu.

I when I boot and go to USER define it says "Initial menu has no LABEL entries! boot:"

I thought that I may need to update isolinux and syslinux.I tried following these instructions:
viewtopic.php?t=880&highlight=update+syslinux+isolinux+damn+linux

Here is what else I've done trying to get this up and running. Using 7zip I extracted my UBCD C:\ubcd50RC1 and Ophcrack to the folder C:\ubcd50RC1\boot\ophcrack

I then edited the file C:\ubcd50RC1\ubcd\custom\custom.cfg with Notepad++... Since I don't know what about this file i have wrong I will paste everything I have listed:

#
# Useful resources for UBCD customization:
#
# - http://syslinux.zytor.com/wiki/index.ph ... UX_Project
# - http://www.ultimatebootcd.com/customize.html
#

MENU INCLUDE /ubcd/menus/syslinux/defaults.cfg
UI /boot/syslinux/menu.c32

LABEL -
MENU LABEL ..
COM32 /boot/syslinux/menu.c32
APPEND /ubcd/menus/syslinux/main.cfg

Code:
LABEL ophcrack
MENU LABEL Ophcrack
TEXT HELP
Start OPHCrack with tables for Vista (or/and XP)
ENDTEXT
CONFIG /boot/ophcrack/boot/ophcrack.cfg

LABEL -
MENU LABEL Your own boot image here
TEXT HELP
Your help message goes here.
ENDTEXT
LINUX /boot/syslinux/memdisk
INITRD /ubcd/custom/boot.img
APPEND -

-----------------------------------------

buckshotwhoami
Posts: 3
Joined: Fri Feb 26, 2010 8:26 pm

I fixed the Menu problem

#10 Post by buckshotwhoami » Sat Feb 27, 2010 6:39 am

Ok, i edited the custom.cfg file to include these lines:

LABEL ophcrack
MENU LABEL Ophcrack
TEXT HELP
Start OPHCrack with tables for Vista (or/and XP)
ENDTEXT
CONFIG /boot/ophcrack/boot/ophcrack.cfg
APPEND /boot/ophcrack/boot/vesamenu.c32

This has fixed the Initial menu has no LABEL entries problem.

But now I ha.ve this problem:
"Could not find kernel image: /boot/vesamenu.c32"

I'm guessing I have to edit a file in the Ophcrack section to point to the new location of the boot kernel, but could someone please verify my guess and if possible point me to the right ophcrack file to edit. Thanks.

buckshotwhoami
Posts: 3
Joined: Fri Feb 26, 2010 8:26 pm

#11 Post by buckshotwhoami » Sat Feb 27, 2010 10:12 am

Ok, thanks to Josso. He helped me find my error. I had to change my settings in the ophcrack.cfg to locate the approipate files. Thanks Josso!

StopSpazzing
Posts: 462
Joined: Tue Sep 09, 2008 4:37 pm
Location: California, USA
Contact:

#12 Post by StopSpazzing » Tue Mar 09, 2010 8:53 pm

Actually was going to post my cfg...but you got it working. I have been running it since 5.0beta10? so it should work fine.

Any chance you can post that iso? I would love that I just have no idea how to add that.. Understand if you can, thanks in advanced..


This is just one of the Tutorials that I will try adding to the wiki once it is upgraded...with step by step instructions. Giving out precompiled cd's of UBCD is not a good idea....because someone could easily tweak a few things and allow it to install a trojan onto your computer. So I do not recommend download other than from trusted sources and doing it yourself. Sorry.
~Just StopSpazzing~

Visit the UBCD Wiki: http://wiki.ultimatebootcd.com
Please check your UBCD ISO MD5 Hash Sum; May prevent issues later on by not having an exact copy.

Currently Working on Common Issues and Repair Tips on the Wiki.

Post Reply