Recovering Data from a Corrupted Win XP Pro Drive

Try looking for help here if you are having problems with the Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Locked
Message
Author
bhartung
Posts: 1
Joined: Wed Aug 17, 2005 7:47 am

Recovering Data from a Corrupted Win XP Pro Drive

#1 Post by bhartung » Wed Aug 17, 2005 7:55 am

I installed SP2 on a Windows XP Pro system and wound up with a Stop: 0x00000024 blue screen. It won't even boot in Safe Mode. After trying to use Recovery Console with no luck I've determined that it's a losing battle and I just need to get some data off the drive before re-installing the operating system.

Here's my issue. The files I need to recover are larger than what will fit on a floppy disk. I have successfully accessed the NTFS partition using the ReadNTFS utility on UBCD and was able to copy a small file to a floppy. Is there any way to get NTFS access along with network access? We have both MS and Netware servers on our network.

Thanks.

Victor Chew
Posts: 1368
Joined: Mon Feb 21, 2005 10:59 pm
Contact:

#2 Post by Victor Chew » Wed Aug 17, 2005 6:16 pm

For read-only access, I have had success with INSERT. See:

viewtopic.php?t=188

You can hook up a 2nd HDD and copy the files over.

bldrdash
Posts: 101
Joined: Thu Feb 24, 2005 10:04 am

Recovering Data from a Corrupted Win XP Pro Drive

#3 Post by bldrdash » Thu Aug 18, 2005 7:04 am

Since the system he's having trouble with was due to
an XP SP2 failure, Captive may not work. Some have
had difficulty with SP2 files in Captive.

Victor Chew
Posts: 1368
Joined: Mon Feb 21, 2005 10:59 pm
Contact:

#4 Post by Victor Chew » Thu Aug 18, 2005 6:13 pm

But I was able to mount the partition as read-only without any help from Captive. Remember I was not able to use Captive until you sent me the updated files.

SteelTrepid
Posts: 36
Joined: Sun Mar 13, 2005 7:31 pm
Contact:

#5 Post by SteelTrepid » Fri Aug 19, 2005 4:21 pm

:wink: Sorry, but...what about UBCD4Win??

Locked