Page 1 of 1

Parted Magic display problem

Posted: Thu Mar 06, 2014 5:20 am
by NickH
Hi,
I currently have UBCD 5.2.9 but have been using older versions for a while now but I've hit a problem.

I now have a brand new PC with a 4th Gen i3 Haswell processor and H87 motherboard (latest BIOS). When I try to run Parted Magic, it does not launch into the desktop, but to some sort of display configuration screen. If I try the Xorg menu option it disappears off for a while then comes back to the same menu. If I use XVesa, the desktop launched, but a couple of inches too high on the screen so I have a black screen under the task bar and I'm missing the top of the desktop so any app which opens on the desktop opens too high for me to be able to grab it and re-position it. I have no idea what to do now.

If it is any help, I also use a Linux distro called ClearOS. This has been booting OK with the grub option vga=0x314 on other systems but it does not work on this one and I had to change it to vga=792.

TIA,

Nick

Re: Parted Magic display problem

Posted: Thu Mar 06, 2014 10:21 pm
by ady
My guess is that you are booting this new system in UEFI mode. For UBCD, you need to set your firmware to CSM (aka. legacy BIOS compatibility mode). But, if you already have an OS booting in UEFI mode (e.g. Windows 8.x), you would need to go back to UEFI mode before rebooting back into that OS.

UBCD depends on BIOS.

Regarding the screen resolution modes, certain codes have changed for UEFI. In other words, UEFI uses some different methods to set the screen resolution. I am not saying this is your particular case, but it could be.

I would suggest trying a (recent) Linux distro that already supports UEFI. If such distro boots correctly in your new system (with correct graphics included), then you might find which video modes would be appropriate for this particular system.

Re: Parted Magic display problem

Posted: Fri Mar 07, 2014 12:56 am
by NickH
My reply got eaten so I'll try again.

The BIOS is an UEFI BIOS but I have transplanted a 2TB MBR disk to it and it works fine so perhaps the BIOS is doing some sort of auto-detection.

I created a USB pen version of gparted using LinuxLive USB Creator and it worked fine. I've just tracked down a 2013-08-01 iso version of Parted Magic and put that on a USB pen with LinuxLive and it has the same problem so I assume it is a Parted Magic issue.

Since all I want for the moment is a partition manager, text editor and file manager, it looks like the gparted iso will do the job. I just liked having all the other utilities on one distro :(

Re: Parted Magic display problem

Posted: Wed Nov 19, 2014 12:03 pm
by dizpo
Same problem here :?

Re: Parted Magic display problem

Posted: Wed Nov 19, 2014 5:05 pm
by Victor Chew
If you would like to try out a LiveCD that we've been working on (tentatively called "UBCD Live"):

viewtopic.php?p=25478#p25478

and provide feedback, that will be great.

Eventually, we will have to replace Parted Magic, and "UBCD Live" is a possible candidate if something better cannot be found.

Re: Parted Magic display problem

Posted: Wed Nov 19, 2014 7:28 pm
by dizpo
Victor Chew wrote:If you would like to try out a LiveCD that we've been working on (tentatively called "UBCD Live"):
...
and provide feedback, that will be great.
Hi Victor. Your link (UBCD Live) works like a charm. Now if only I could add parted magic to it and do a secure erase on several SSDs...

Re: Parted Magic display problem

Posted: Wed Nov 19, 2014 9:34 pm
by ady
dizpo wrote: Hi Victor. Your link (UBCD Live) works like a charm. Now if only I could add parted magic to it and do a secure erase on several SSDs...
You could buy the latest release of pmagic and get support there. Or you could search for the alternatives, your choice.

Re: Parted Magic display problem

Posted: Wed Nov 19, 2014 11:54 pm
by Victor Chew
Now if only I could add parted magic to it and do a secure erase on several SSDs...
Which tool in Parted Magic do you use to do this?

Re: Parted Magic display problem

Posted: Thu Nov 20, 2014 4:32 pm
by dizpo
ady wrote:
dizpo wrote: Hi Victor. Your link (UBCD Live) works like a charm. Now if only I could add parted magic to it and do a secure erase on several SSDs...
You could buy the latest release of pmagic and get support there. Or you could search for the alternatives, your choice.
Ady, that's probably the best advice yet!

Re: Parted Magic display problem

Posted: Thu Nov 20, 2014 4:34 pm
by dizpo
Victor Chew wrote:
Now if only I could add parted magic to it and do a secure erase on several SSDs...
Which tool in Parted Magic do you use to do this?
There's a Secure Erase tool Victor. I use it all the time on my desktop, but the laptop has a Haswell CPU with both onboard and discrete GPUs, and the display is getting messed up with them somehow.