Impossible to use HDD Diagnose
Posted: Sun Feb 15, 2009 8:43 am
First, excuse me for my english, because i am French.
I am a faithful user of UBCD since 5 years, and i customize it for
my personnal use.
With older and recent PC platforms, there is any problem with the
utilisation of UBCD V5.
With newer PC platforms, Notebook or Desktop, it is impossible to
diagnose HDD. Test is impossible with CD version, USB version, and also
with version b11 patched for Grub4Dos.
If you have a chipset with parameter SATA as IDE, UBCD run very well.
If you have a chipset HDD Sata and CD Sata, when you want to run DFT,
the programm loading stop at the text LOADING DFT.
Seatools lauch correctly, but no hard drive detected.
Hdat2 no detect hard drive.
Vivard dont load correctly with an CD error code about "***.bat"
My observations are :
In the Bios parameters, the CDRom is not in CDRom drive but in
Optiarc CD Drive.
When you use a Vista PE, No phisycal HDD present in the Explorer.
The problem is present for theses platforms :
TOSHIBA : Newer Notebooks
PBell : Newer Desktops
HEWLETT & COMPAQ : Newer Desktops and Notebooks
ACER : Newer Desktops.
FUJISTU-SIEMENS : Newer Notebooks
Also if you use PartedMagic, it is impossible to mount the physical HDD
off your computer, besause it is not present in the explorer.
It is difficult to understand where is the problem, besause the computer
run, and it is possible to restore it with the DVD Masters.
I hope i am not the one who have this problem, but the first who
say you about this.
beforehand thank you
Important precision, memory test is running correctly with Newer computer with all versions off UBCD V5
I am a faithful user of UBCD since 5 years, and i customize it for
my personnal use.
With older and recent PC platforms, there is any problem with the
utilisation of UBCD V5.
With newer PC platforms, Notebook or Desktop, it is impossible to
diagnose HDD. Test is impossible with CD version, USB version, and also
with version b11 patched for Grub4Dos.
If you have a chipset with parameter SATA as IDE, UBCD run very well.
If you have a chipset HDD Sata and CD Sata, when you want to run DFT,
the programm loading stop at the text LOADING DFT.
Seatools lauch correctly, but no hard drive detected.
Hdat2 no detect hard drive.
Vivard dont load correctly with an CD error code about "***.bat"
My observations are :
In the Bios parameters, the CDRom is not in CDRom drive but in
Optiarc CD Drive.
When you use a Vista PE, No phisycal HDD present in the Explorer.
The problem is present for theses platforms :
TOSHIBA : Newer Notebooks
PBell : Newer Desktops
HEWLETT & COMPAQ : Newer Desktops and Notebooks
ACER : Newer Desktops.
FUJISTU-SIEMENS : Newer Notebooks
Also if you use PartedMagic, it is impossible to mount the physical HDD
off your computer, besause it is not present in the explorer.
It is difficult to understand where is the problem, besause the computer
run, and it is possible to restore it with the DVD Masters.
I hope i am not the one who have this problem, but the first who
say you about this.
beforehand thank you
Important precision, memory test is running correctly with Newer computer with all versions off UBCD V5