Hi!
I've been having trouble with my hdd the last couple of days and got recommended to use UBCD to see if the disk is damaged. So I burnt it to a DVD (version 5.0.3) and it loads up just fine, but when I enter the HDD menu and try enter the ES-Tool I eventually get the following lines:
QCDROM v 3.7, 11-12-2006
Driver name is "CDEXATA1"
EIDE DMA controller I-O address F090h, chip I.D. 80861c00h.
No CD/DVD drive to use; QCDROM not loaded
CDROM: No CD-Rom drivers have been loaded
CDROM: Aborted...
and it then tells me that "EStool.bat is missing, check CD" (not exactly like that but something similiar).
Any ideas on what to do?
Problems with CD/DVD driver?
Moderators: Icecube, StopSpazzing
Re: Problems with CD/DVD driver?
Try UBCD v5.1 alpha3:
viewtopic.php?f=7&t=4230
viewtopic.php?f=7&t=4230
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
Re: Problems with CD/DVD driver?
Thank you, that did the trickIcecube wrote:Try UBCD v5.1 alpha3:
viewtopic.php?f=7&t=4230