Seagate tools and UBCD

Try looking for help here if you are having problems with the Ultimate Boot CD.

Moderators: Icecube, StopSpazzing

Locked
Message
Author
Lawrence_Chiu
Posts: 2
Joined: Fri Mar 24, 2006 9:56 am

Seagate tools and UBCD

#1 Post by Lawrence_Chiu » Fri Mar 24, 2006 10:05 am

I am having problems with both DiscWizard and Seatools when launching via UBCD.

Using the original floppy images from Seagate and booting via floppy works, but when using UBCD, DiscWizard gives the following error:

Fatal error TNT.11020: application 'E:\DWSE.EXE' has caused an
exception: Divide by zero exception
ProcessId=3235 ThreadId=3236
User Registers:
...

Seatools hits 35% during the load and goes back to E:\ prompt.
I have tried memdisk, diskemu, and bcdw boot. All have the same problem.
I am using v3.4 of UBCD and the latest copies of DiscWizard and Seatools.

Scott Cooper
Posts: 136
Joined: Mon Apr 18, 2005 9:07 pm

#2 Post by Scott Cooper » Thu Mar 30, 2006 7:52 pm

In earlier versions of UBCD I have had issues with SeaTools dropping to a DOS prompt for no appearant reason, but have not had problems with the newest version so far. (I've not used it enough to judge)

Does Drive Fitness Test or MemTest run?

Locked