Hi there,
Since i seem to have a quite buggy Fujitsu hard drive (BSOD during Windows boot, with error 0x00000024 + 0x001920FE), i just used my good-ol' UBCD v3.4...
Gosh, the diagnostic tool in it - v6.30 - doesn't deal with SATA hard drives.
So this is why i downloaded/burned UBCD v4...
"Argh" again, the tool has the same version onto v3.4 and 4.0.3.
So i finally had to find my way, looking for a more recent version of the tool. I then discovered it is nearly impossible to find the tool onto Fujitsu's web site, but i found a v6.61 of the tool.
I'm testing the drive right now, after i made a DOS boot disk and copied the FJDT.EXE on it.
So, stop the "BLAH" thing : here is the suggestion.
It could be very useful (i'm probably not the only person around the world to have a SATA Fujitsu HD) to substitute v6.3 tool with the 6.61 one.
If you ask, i downloaded the tool from this URL
Greets,
--
Aurélien (a french UBCD's casual user)
Fujitsu-Siemens Diagnostic Tool
Moderators: Icecube, StopSpazzing
I auto-reply to this post, just to add that the Fujitsu hotline mailed me another web page, where the version 6.90 of their tool may be found :
http://193.128.183.41/home/v3__product. ... =swr&wg=13
I didn't use it, but since v6.61 supported SATA, this one should do no less !
http://193.128.183.41/home/v3__product. ... =swr&wg=13
I didn't use it, but since v6.61 supported SATA, this one should do no less !
-
- Posts: 1368
- Joined: Mon Feb 21, 2005 10:59 pm
- Contact: