Hello,
I am French (sorry for the atraduction).
Since the system "UEFI" every time I want to test a hard disk, the hard disk is not recognized.
However, I activated "CSM" or "Legacy" and disable "secure boot".
But nothing to do hard drives are never recognized ??
How to do
Thank you
Hard disk test with UEFI impossible ?
Moderators: Icecube, StopSpazzing
-
- Posts: 4
- Joined: Tue May 29, 2018 8:09 am
Re: Hard disk test with UEFI impossible ?
No one to answer?
How to test a hard disk on a UEFI system with UBCD?
Hard drives are never recognized.
Should I use another program?
How to test a hard disk on a UEFI system with UBCD?
Hard drives are never recognized.
Should I use another program?
Re: Hard disk test with UEFI impossible ?
You can try adjusting the CSM setttings and sometimes you may have to adjust SATA/RAID settings as well. Although, if the controller drivers are not included in the drive testing tool or kernel you'll have issues with that as well.
You can check out my post from the UBCD4Win section for some suggestions --> https://www.ultimatebootcd.com/forums/v ... 19&t=15724
Win10PESE and more recently Win10XPE are great for testing Window 10 based systems and previous winbuilder version are still available but some need to be built first.
You can check out my post from the UBCD4Win section for some suggestions --> https://www.ultimatebootcd.com/forums/v ... 19&t=15724
Win10PESE and more recently Win10XPE are great for testing Window 10 based systems and previous winbuilder version are still available but some need to be built first.
-
- Posts: 4
- Joined: Tue May 29, 2018 8:09 am
Re: Hard disk test with UEFI impossible ?
OK, thanks, I'll go see this;)The Piney wrote: ↑Tue Feb 26, 2019 6:33 pm You can try adjusting the CSM setttings and sometimes you may have to adjust SATA/RAID settings as well. Although, if the controller drivers are not included in the drive testing tool or kernel you'll have issues with that as well.
You can check out my post from the UBCD4Win section for some suggestions --> https://www.ultimatebootcd.com/forums/v ... 19&t=15724
Win10PESE and more recently Win10XPE are great for testing Window 10 based systems and previous winbuilder version are still available but some need to be built first.
Otherwise, yes, I configure in csm, but a foit started on Western Digital or Seagate tests, it detects me no disk ....
I'm just looking for a software that can test hard drives.
Re: Hard disk test with UEFI impossible ?
You can try putting the drive into an external enclosure. I've had some manufacturer's diagnostic tools work well enough over USB but some do not detect the drive or think they have "no media".
-
- Posts: 4
- Joined: Tue May 29, 2018 8:09 am
Re: Hard disk test with UEFI impossible ?
Yes currently I place the hard drive on another motherboard that does not manage the UEFI ... and no problem, but it's quite compelling ...
There is a problem with UBCD on the new motherboard managing the UEFI .... so it will soon be complicated to use this utility ...
Thank you