Hello,
I have seen, that there is an s-ata driver for optical devices implemented on ubcd. Can anybody explain me? How could I implement it myself to a dos batch???
I found the driver gcdrom.sys. But if I implement it to my batch, it doesn't work.
Could anybody help me???
Kind regards
Mario
S-ATA driver
Moderators: Icecube, StopSpazzing
-
- Posts: 3
- Joined: Wed Jul 16, 2008 3:20 am
It doesn't fit!
Thank you for your answer.
Your answer seems to be correct - but in my case - it is not the solution.
Is there an other possibility to edit the gcdrom driver to my batch?
My sourcecode is:
In my config sys:
DEVICE=XCDROM.SYS /D:CDROM
DEVICE=GCDROM.SYS /D:CDROM
or
your remark:
device /q GCDROM.SYS /D:MSCD000 /Cn
in my Autoexec.bat:
MSCDEX.EXE /D:CDROM /L:X
Could you help me???
Your answer seems to be correct - but in my case - it is not the solution.
Is there an other possibility to edit the gcdrom driver to my batch?
My sourcecode is:
In my config sys:
DEVICE=XCDROM.SYS /D:CDROM
DEVICE=GCDROM.SYS /D:CDROM
or
your remark:
device /q GCDROM.SYS /D:MSCD000 /Cn
in my Autoexec.bat:
MSCDEX.EXE /D:CDROM /L:X
Could you help me???
ah, ok. if you're installing the driver from config.sys then try this:
where n=1..3
i believe your autoexec should then contain:
again, where n=1..3
assuming your sata device is valid, it should work.
(-:
Code: Select all
device[high]=GCDROM.SYS /D:MSCD000 /Cn
i believe your autoexec should then contain:
Code: Select all
MSCDEX.EXE /D:CDROM /L:n
assuming your sata device is valid, it should work.
(-:
-
- Posts: 3
- Joined: Wed Jul 16, 2008 3:20 am
Good idea - but not the solution
Hello,
if have practiced your solution.
I implemented your sourcecode but only get the message:
"A:\>MSCDEX.EXE /D:CDROM /L:n "
(it doesn't matter if I change the n to 1...3)
"Device driver not found: 'CDROM'
No valid CDROM device driver selected"
What did I do wrong???
Do you have any idea?
if have practiced your solution.
I implemented your sourcecode but only get the message:
"A:\>MSCDEX.EXE /D:CDROM /L:n "
(it doesn't matter if I change the n to 1...3)
"Device driver not found: 'CDROM'
No valid CDROM device driver selected"
What did I do wrong???
Do you have any idea?
config.sys
autoexec.bat
what error message(s) do you get?
Code: Select all
DEVICE=GCDROM.SYS /D:MSCD000 /C0
DEVICE=GCDROM.SYS /D:MSCD001 /C1
DEVICE=GCDROM.SYS /D:MSCD002 /C2
Code: Select all
MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002
what error message(s) do you get?