Hi from Germany,
I'm trying to load SHAT2 but while loading there is the message:
"INT 13 08: Failure, assuming this is the only drive"
and the system froze.
Here is an screenshoot:
Note, that UBCD v5 is running on an Acer Aspire 7520 with 2 SATA-HDD and one IDE HDD (connected by an USB Adapter).
I tried to check the IDE HDD.
What does this messege mean, and how to "bypass" it?
Best regards from Germany!
Update:
The UBCD-CD works fine on another PC.
Some Other Tools like MHDD give the same Error-Message.
So its not the CD or the program, but the failure have to search in my Laptop or the USB-Controller or Adapter, but where and how?
What is your mind?
INT 13 08: Failure, assuming this is the only drive.
Moderators: Icecube, StopSpazzing
-
- Posts: 2
- Joined: Wed Jun 10, 2009 5:34 am
Try adding 'raw' to the APPEND line.
See my third post at: viewtopic.php?t=1845
Let me know if it helps and which program do need it.
Does the FreeDos image work without 'raw'?
See my third post at: viewtopic.php?t=1845
Let me know if it helps and which program do need it.
Does the FreeDos image work without 'raw'?
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
Use Parted Magic for handling all partitioning task: http://partedmagic.com/