Im kind of new to UBCD, i downloaded the ISO, used ubcd2usb.bat without problems.
Im using Kingstone Datatraveller II 4gb
Usually when booting from USB there is not a problem much problem booting it, im using a Gigabyte (GA-P35-DS3) motherboard.
So in the boot menu (F12) i chose USB-HDD, it tries to boot the chip but gives the following error:
SYSLINUX 3.36 2007-02-10 CBIOS Copyright (C) 1994-2007 H. Peter Anvin
Could not find kernel image: linux
boot:
I thought i had done something wrong and troubleshot it for a few mins, until i decided to try it on my laptop (DELL Inspiron 8600) and to my surprise it was working smoothly.
If anything comes to mind why the usb flash drive will only boot successfully on my laptop and not on my pc, then please advice.
Thanks.
USB boot UBCD411
Moderators: Icecube, StopSpazzing
Upgrade syslinux or try UBCD50b12.
See my post at: http://ultimatebootcd.com/forums/viewto ... e+syslinux
See my post at: http://ultimatebootcd.com/forums/viewto ... e+syslinux
Download Ultimate Boot CD v5.0: http://www.ultimatebootcd.com/download.html
Use Parted Magic for handling all partitioning task: http://partedmagic.com/
Use Parted Magic for handling all partitioning task: http://partedmagic.com/