You may want to contact the manufacter online or see if there are instructions included with the modem on how to set it up properly. Try googling the name of the modem and see what you can find. That's what I recommend because its hard knowing everything single hardware configuration.
Best of luck to you.
USB card
Moderators: Icecube, StopSpazzing
-
- Posts: 462
- Joined: Tue Sep 09, 2008 4:37 pm
- Location: California, USA
- Contact:
~Just StopSpazzing~
Visit the UBCD Wiki: http://wiki.ultimatebootcd.com
Please check your UBCD ISO MD5 Hash Sum; May prevent issues later on by not having an exact copy.
Currently Working on Common Issues and Repair Tips on the Wiki.
Visit the UBCD Wiki: http://wiki.ultimatebootcd.com
Please check your UBCD ISO MD5 Hash Sum; May prevent issues later on by not having an exact copy.
Currently Working on Common Issues and Repair Tips on the Wiki.
Re: USB card
To see the port that a USB device is using, run this command before you plug the device in.
Then when you plug in the device, it will show the system messages associated with that device. One of them should be the /dev/ttyx of the device. To escape the messages, use the Ctrl+c keys. HTH
Code: Select all
tail -f /var/log/messages