Network issues with UBCD4Win

Note: If you are looking for information on UBCD4Win (UBCD for Windows), YOU HAVE COME TO THE WRONG PLACE!

Moderators: Icecube, StopSpazzing

Post Reply
Posts: 2
Joined: Tue Jul 03, 2018 6:43 pm

Network issues with UBCD4Win

#1 Post by DrOli » Wed Jul 04, 2018 11:38 am

I appreciate UBCD4Win is a bit long in the tooth, but I would be grateful for any assistance with getting UBCD4Win to recognise my network controllers.

I have used BartPE, and get similar results.

I can add various drivers, such as SCSI etc, which work on launch.

I added drivers for my network controllers, but can't get those to work after many permutations. I use a WinXP image that is SP3 already, no slipstreaming required. I have successfully added plug-ins as well.

As a matter of interest HBCD's iso does provide network on this machine, but no SCSI, which is the vast majority of the HD's etc ... oh well.

This is a SuperMicro H8DM8/AMD64 MotherBoard (MB) with an MCP55 NVidia chip-set. There are NO NIC's as such. Ethernet connections and hardware are part of the MB/chip-set. Normally, one runs the NVidia installer for the motherboard, and that installs everything.

I put the NVidia software in the PE Drivers/Net/ dir. I have also copied the drivers actually on the running OS (sys32 and sys32/drivers etc), just to be on the safe side. I have extracted all cabs etc that can be (there are some exe's that I can't extract). I have tried many permutations.

... everything works from the launch CD/DVD except network, which complains about can't find "normaliz.dll", but I have copied that to the PE build dir's too.

Clearly, it must be possible since HBCD provides network access (but no scsi) ... any thoughts would be much appreciated

Post Reply