As I need to unlock an encrypted Seagate 2TB BUP + drive I am following: HDD -> Diagnosis -> MHDD32 v4.6
Before attempting to list the drives, these options below display:
1) Start computer with ADAPTEC SCSI adapter support
2) Start computer without SCSI support
When I select option 1 UBCD warns:
Code: Select all
AIC-78XX/AIC-75XX ASPI Manager for DOS
Version 1.36
Copyright 1994-1999 Adaptec, Inc.
Unable to find any AIC-78XX/AIC-75XX
ASPI8DOS.SYS installation failed.
Code: Select all
Port 1F0h
Port 170h
Port 100h
PCI Controllers
Code: Select all
Device not ready
If i select option 2 (Start computer without SCSI support) from above, UBCD displays the same ports defined directly above and likewise I get the same results when I access any port and issue "unlock":
Code: Select all
Device not ready
Additionally, UBCD warns:
Auto detect disabled see: MHDD.CFG
I CD'd into /MHDD/CFG (DIR displays the file MHDD.CFG) and using:
Code: Select all
edit MHDD.CFG
OR
notepad MHDD.CFG
from the CLI in UBCD to edit MHDD.CFG, however those commands are not recognized. I located in one forum topic pertaining to MHDD.CFG and it was mentioned that MHDD.CFG could be edited under Windows, only I am unable to locate the directory /CFG let alone the file MHDD.CFG in Windows for some reason.
When in Windows viewing the UBCD disk I see:
Code: Select all
boot
pmagic
ubcd
Also, with respect to the SCSI option(s) [1 & 2] is there some documentation I could be pointed to to help me resolve this issue?