Ultimate Boot CD

Hi,
i'm a UBCD novice.
i cannot obtain access to a HDD western digital : disk controller failure.
In the UCBD menu MBR tool V2 , there are several choices:
1) perform automatic backup of all MBRs to disk
4)work with a MBR
5)work with a track0
what do you advise me to do to repair the HDD ?
thank you in advance

A disk controller failure usually indicates that UBCD boot disk image that is being used doesn't have a driver for the interface controller which the HDD is connected to. You can try downloading the newest version from the manufacturer and use that.

https://support.wdc.com/downloads.aspx?DL

If that doesn't help, provide some more information such as PC manufacturer/model and HDD model and any other information like what you are trying to do and what is wrong.

Hi,
I have 2 similar IDE Western digital hard drives. one is recognized without problem in a PC, the other one is recognized at the bios level but not at the explorer level. The diagnostic indicates : initdisk: error reading partition table drive 00h, sector 0 . there is a continuous tactactac when it begins so i give up the repairing.
thank you for your answer.