Hi, I recently had a hard drive failure and I'm trying to use UBCD.
Before trying it, I used my computer's built-in recovery system to no avail. I decided to try out UBCD, but my computer won't boot from it. I used the downloaded EXE and burned the ISO file onto disk using Nero. Is there something I'm not doing right?
UBCD not starting
Moderators: Icecube, StopSpazzing
-
- Posts: 36
- Joined: Sun Mar 13, 2005 7:31 pm
- Contact:
First, you need to make sure the BIOS is set to boot from CD. Have you verified this yet??
Second, you may have burned your ISO image incorrectly. When you look at your "burnt" CD....how many files and folder are there on it? If you only see one file, you burnt it wrong. If you see several files and folders then that is correct and it should boot.
Hope this helps, please let us know how everything works out. Post more questions if necessary.
Second, you may have burned your ISO image incorrectly. When you look at your "burnt" CD....how many files and folder are there on it? If you only see one file, you burnt it wrong. If you see several files and folders then that is correct and it should boot.
Hope this helps, please let us know how everything works out. Post more questions if necessary.
Same problems
OK, I am having the same issues with my cop"ies".
My disk starts to run then stops at [DR-DOS] A:\. Once it reaches this point I can go no further.
I have downloaded from different mirror sites and used different machines to burn information to disk and all I have is one ISO file showing? According to the last post there are supposed to be 7 files? Could all the mirror sites be pushing a broken file or am I just missing something?
Thanks
feeling real dumb
My disk starts to run then stops at [DR-DOS] A:\. Once it reaches this point I can go no further.
I have downloaded from different mirror sites and used different machines to burn information to disk and all I have is one ISO file showing? According to the last post there are supposed to be 7 files? Could all the mirror sites be pushing a broken file or am I just missing something?
Thanks
feeling real dumb
-
- Posts: 36
- Joined: Sun Mar 13, 2005 7:31 pm
- Contact:
You need to burn the ISO file properly. Sounds like you tried to make this CD bootable with an option in your software, this is wrong. Just burning the file to CD does nothing. You need to select "Burn Image file to CD" in your burning software. An ISO image needs to be processed properly by your burning software, pretty much all burning software has the option to burn ISO's. ISO's are an exact image of CD, so when they are burned properly the booting information, etc. will be placed on the CD.
Check out these instructions, they are for CD Burner XP Pro, but they should help provide you with an idea of what you need to be looking for in your software:
http://www.ubcd4win.com/howto.htm#burning
Check out these instructions, they are for CD Burner XP Pro, but they should help provide you with an idea of what you need to be looking for in your software:
http://www.ubcd4win.com/howto.htm#burning